Recent content by dwolkomir

Cleaning out of the garage set of four stock wheels with center caps locks and the tool. clear coat has a couple rough spots but they are in good shape,The O-rings are there but dry. Looking for $400 plus shipping for the set. stock turbo and downpipe, make me an offer. STG Ultimate chip...

Cleaning out of the garage, I have a set of four stock wheels with center caps locks and the tool. The O rings are there bud dry. Looking for $400 plus shipping for the set. stock turbo and downpipe, make me an offer. STG Ultimate chip, make me an offer. HKS Super sequential blow off valve...

Cleaning out the garage, I have a set of stock wheels, the clearcoat is in OK condition with center caps, locks, and the tool, the prints are there but dry. Looking for $400 for the set plus shipping. stock turbo and downpipe, make me an offer. HKS super sequential blow off valve, make me an...

Cleaning out the garage, I have a set of stock wheels, the clearcoat is in OK condition with center caps, locks, and the tool, the prints are there but dry. Looking for $400 for the set plus shipping. stock turbo and downpipe, make me an offer. HKS super sequential blow off valve, make me an...

Re: 93 Ty for sale $6,000 obo Truck is sold. Thanks for all the interest.

Re: 93 Ty for sale $6,000 obo The truck lived in North Dakota from 1996 to 1999 and then in WI after that. It saw winter in 96 and 97 with sand instead of salt and has been a sunny weather driver since that, its done everything from drag strip to autocross to hauling the kids for ice cream and...

1993 GMC Typhoon Black/Black 78,797.4 miles Cladding perfect very nice condition interior and exterior https://www.dropbox.com/sc/aqe0raohb41wn33/q0JORwUbtw Motor Built 2006 by Rockford Racecraft Shot peened, Cryogenically frozen and nitride coated crank Crane Cam Eagle rods and...

Re: 95% electrics dead Thanks for the heads up, I guess I will have to dig a little further into the harness and see if they messed with anything further up the line. Like I said before I am not good with the electrical schematics but it looks like it should be a single continuous wire from the...

Re: 95% electrics dead My electrical terminology is lacking but I can read a multi-meter and use a test light. The fusible links were fine. There was some very poorly done splicing of the 2 fusible links and their associated wires at the alternator stud that was done by an infamous typhoon...

Re: 95% electrics dead Never Mind, I got it all figured out with a little trial and error. The bad wire is the one running to the 2 screw junction, the other is the ignition circuit and works fine. I will have to pull and replace the wire to the junction and we should be all good. Thanks for...

Re: 95% electrics dead I jumpered the alternator stud to the 2 screw junction on the firewall and she came right back to life. I replaced the 2 fusible links on the 2 wires at the alternator and nothing happened, must be a bad wire or another link somewhere further back. On the alternator...

Re: 95% electrics dead The truck does have a battery relocate to the rear with a kill switch.2 gauge fused at the battery runs up to the engine bay to another fuse block that sends a 4 gauge directly to the starter and an 8 gauge to the alternator stud. power is good all the way from the...

Re: 95% electrics dead Is there a procedure for checking the ignition switch? Gonna start checking all the grounds and the wiring at the starter next.

Out for a drive yesterday and while accelerating away from a light at half throttle truck suddenly dies, lost everything like a master switch had been thrown. Got it towed home and the only things working in the truck are gauge lights, interior lights, headlights, parking lights, rear running...

Re: Cool or Tacky? I like the C6 setup. The stance would look better if the front was a little lower, right now that pic looks like the rear is actually lower than the front.