Need Part Number for a Fitting

Richard Le

Richard Le

New member
Does anyone have a part number for the square-ish fitting that mounts to the front of the lower intake with a hose attached to it? I don't have a picture handy, but it's behind the thermostat housing. If this fitting is no longer available, does anyone know what size and thread pitch it is? Thanks.
 
StuckinCincy

StuckinCincy

Member
Re: Need Part Number for a Fitting

If it's the turbo coolant return line, the original number is #15637671. Don't know if it's still available. It's a 3/8 pipe thread.
 
Richard Le

Richard Le

New member
Re: Need Part Number for a Fitting

I take it back, it's actually located just in front and below the thermostat housing, as shown in the picture below:

fitting.jpg
 
ghettosled

ghettosled

SYTY SUPERSTORE
Re: Need Part Number for a Fitting

you can find them on summit. just type in 3/8 90 deg fitting. i think the hose is 3/8" also, so you just need a 3/8 npt to 3/8 hose barb 90. buy one with a short leg so it spins around when tightening.
 
skwayb

skwayb

NWSTP
Re: Need Part Number for a Fitting

I might have one left over from all the AN fittings I bought. I swear I bought a NTP fiting like that...
 
SY2455

SY2455

70's Veteran
Re: Need Part Number for a Fitting

If you go to your local Hardware store, you should be able to find it in brass.
 
NecroWolf

NecroWolf

lost marbles member
Re: Need Part Number for a Fitting

HERE are several types of 3/8npt to 3/8 nipple, including one that looks kinda stock, but is shiny.
 
K

kwick6

Donating Member
Re: Need Part Number for a Fitting

oops, thats if you want to go AN braided to replace the stock turbo water lines. :tup:
 
You must log in or register to reply here.
Top