Search results

I started doing some p&p on a set of vortecs that I have. I was wondering first off if anyone has a good close up pic of the cc's? What I want to know is how you tackle the ramp on the back side of the plug hole. One side of the ramp has a sharp drop which means a lot of material comes off so Im...

Anyone have an exhaust manifold crossover tube? It can have a flange for wastegate welded on it. Thanks

Does anybody offer the service of modding the edelbrock intake, or have 1 they want to sell? Thanks

I was just talking to a buddy of mine and the trade in value of our trucks came up and I had no idea what to tell him. I tried the search and am not thinking of trading in my truck. What would the trade in value of a really good low mile sy and ty be if you bought say a new 1500 and would a...

How do some guys run a round style throttle body like mustang or accufab. Im trying to figure this out to keep stock ecm and $59. Its the tps and the tv cable ramp i cannot find any info on.

I was wondering if anyone can get me a good picture of a propshaft loop (how it mounts up not so much the loop itself) I've only seen chiver's so if there is a better design out there I'd appreciate that one. I've been trying to get loops for years on here and it doesn't look like anyone wants...

These seem to be the same minus rattle springs and should be fine right?

I'm looking for another good set of Vortecs that have been drilled, bosses cut, and dipstick ready. Thanks Ryan

Pics to follow Really nice set of door panels with speaker cutouts-$250 Stock turbo 40,000 on it no shaft play-$250 Set of never installed lifters-$50 SOLD Stock air box mint condition-$35 Set of ls2 beehives and valves-$100 New poly graphite cab and box mount bushings-$100 2 5/8" boost...

Ok I just wanted to find out some info. About 13 yrs ago I had a problem when dropping in my motor I was tightening the tranny bolts and I don't know if there was something in the locator pin hole or it had a stress crack or what but the bell housing split. Anyways the truck had like 40,000 on...

Is there anywhere to get the load capacity sticker for the tailgate or has anyone remade them?

Its time for me to quit using xylene and get an alky kit and I swore i read a post that someone used a devils own non progressive alky kit and could use tuner pro to control the pump and fine tune it better than with the progressive kits. So is this possible and logical? I searched for the post...

So my truck has been sitting for about three years. It was put away tuned up and running pretty good but between working 75+ hours a week and our 1 year old son I haven't had much time to play. Anyways I had to run to Home depot to get a few things and decided not to take the powerstroke. So I'm...

In January House speaker Nancy Pelosi purchased a 1987 buick gnx reportedly kept for herself. It was in the January car and driver mag.

I am looking for cladding for my truck. I am doing new paint soon so would like to get mint cladding if possible. Also would like new mounting disks and brackets. any help would be appreciated. thanks

I am looking for a set of stock rims to buy or trade for a new set of zo6r rims chrome with pirelli p7000s. Thanks

I just tried to hook tuner pro back up in the truck but now what ever bin be it stock or ultimate any other i get knock like crazy just idling and is un drivable, take tuner pro off and put stock memcal in 2-3 degrees retard on full pull and drives perfect switch it back and the knock counter...

I fixed my backfiring problem by getting a different distributer cap so it runs pretty smooth. but i forgot about my problem from last year of not being able to get my idle afr past 11. When I try to adjust it through f29c it will fluctuate about .5 either way, and when I adjust the base pulse...

Last year alI through the whole summer my truck ran fine then without any change it one day started to backfire out the exhaust. It's been about 8 months and I still haven't figured it out. It seems to idle fine and you could probably drive it but when ever it gets down to the 800 to 1000 rpm...

Are cr42ts the same as r42ts delco plugs, The guy at the parts store told me that the c just means that they come in bulk is this correct? Thanks