Recent content by shonuff

Re: Fs 91 gmc syclone are you interested in any trades?

Re: boost cut? how do you hotwire the ic pump? that sounds like a good idea. and what are the benefits to doing that? and as for the pump, i bought the entire Racetronix kit. the 255 pump and wire harness. the detonation just happened once. i make sure to drive it like a grandma till i...

Re: boost cut? i bet thats also the reason why im detonating when i hit full boost. the full pump is probably starving the cylinder. am i on the right track here? i just bought the Racetronix kit so hopefully when i install it next week itll cure both problems.

ok under heavy acceleration and i hit max boost the Ty stumbles on its face. i feels like boost cut. i searched but couldnt find anythng about this. what do sy/ty's use to eliminate boost cut? this only happens when i really accelerate hard. if i accelerate under say... 80% hard it still pulls...

Re: change fog lamp bulb? thanks for the help

Re: Turbo to IC hard pipe i took a good look at that and decided to be a copy cat haha i went out and got two 2foot(just wanted to make sure i had enough) lengths of 2' aluminum pipe. im either going to get a 90deg silicone elbow to attach the two pipes and each end to the turbo and IC. or do...

Re: Turbo to IC hard pipe ill keep looking. $85 for that is a bit pricey. thanks

ive got a stock turbo and want to change out the stock dryer hose for a hard pipe. thanks

i know this is a stupid question but i just cant find the answer searching. i just have one bulb out on my fog lamps. can i just change the bulb or do i have to buy a whole new set up like the head lamps? i have silverstars the guy at Auto Zone said will fit but it looks like a sealed beam. i...

Re: lots of performance parts...then the trucks fs ho much do you want for the turbo? also interested in the dp. what other parts do you have for sale? im in need some some basic performance mods.

Ok so i understand you can either use blocks or lowering shocks for the rear of my Ty. so what do you need for the front suspension? im not looking to slam it, just a couple inches max. thanks

i need both rear shocks and a drivers side head lamp. my fog light is out to but i think all i need to do is change the bulb? but if thats not the case i need the left fog lamp. this is for a Ty. thanks

Re: Door handle cladding and factory wheels i believe i have those black claddings. i know i have at least one. but ill check to see if i have the other eone. i should though.

Re: ty keeps dying? ECM B fuse blowing? are you saying the same fuse kept blowing? and once you switched to the Walbro it worked fine?

Re: ty keeps dying? ECM B fuse blowing? k nevermind im just going to go with the full Racetronix kit. thanks for everyones help