Search results

Anyone know the Spicer part # for the Double Cardon U-Joints in the front prop shaft? Thank you

Re: Oil Filter leak I dont see anything when the truck is running. nothing seems to be leaking out. But after the truck sits and I walk into my garage there are a few drops of oil inder the fender. I trace it back and if I touch the bottom of the oil filter its wet with oil. i cleaned the...

My oil filter likes to "sweat". Nothing serious but I can never seal it completely to where after a day of driving little droplets form on the bottom of the filter. is this common? truck is 100% stock. thanks

Re: Belltech rear Syclone Swaybar PM sent

Anyone know if the little rubber boot/sleve at the trans end of the shifter cable is replaceable? is there anything else that uses an according style boot? thank you all

Re: Trans/Transfer gase gasket amazing scans. thank you, very helpful

Re: Trans/Transfer gase gasket will replace both. thank you

Re: Trans/Transfer gase gasket thank you!

Pulling out the trans to replace the rear main seal. besides a new trans fluid/filter are there any other "house keeping" items I should replace since i will have the trans out? Will have a replacement prop shaft in, relacing the U-Joints, new oil pan gasket, rear main seal, new trans/transfer...

Anyone have the GM part # for this? or have a new one they want to sell? rather give the money to someone here than @ the stealership. thanks

Re: 92 gmc typhoon for sale so calif The seller says its a clean title but the odo doesnt work so who knows on the true mileage......

Re: abs help Reboosted- you ever figure this out? mine has been doing the same thing. Telling its a ground issue but I cant find where. Replaced the ABS controller and sensors just to be safe and still having a short somewhere. curious if you happen to solve it. thanks

Re: FS - New GM Head and Intake Gaskets Re: FS - New GM Head and Intake Gaskets pm sent

Re: Wheel repair in Los Angeles Wheels USA looks exactly what I am looking for. Thank you very much. ever use them?

Re: WTB-stock front prop shaft PMs sent to you both. thank you

Anyone use a good shop in LA to restore their factory rims? Thankfully mine really only need new clear coat but I know its tought to get the center caps to have the red GMC after wheel work. any/all suggestions appreciated. thank you

Looking for a original front prop shaft. Want one with a thr boot in good condition. Know its a long shot. Truck is totally stock and about to be torn apart for full restoration. Would take a boot repair kit if anyone still has one or knows where one is. My prop shaft tore the boot...

I am NO good at electrical so if someone could push me in the right direction: My ABS light is on and my scan tool is telling me its code 86 which is a short in the ABS light itself. i have tested all connections at the ABS unit and its getting 12 volts. so whats the easiest way to find the...

Re: ABS Help When you bled the brakes did you bleed at the ABS unit? It could be the pressure switch not reading correctly due to air in the ABS unit. you need 2 special tools to properly bleed the ABS unit. From your soft pedel I would bleed the ABS unit at least twice before replacing...

My Sy has started a slight stumble at idle. For the heck of it I hooked up a narrow band A/F gauge and I noticed when the stumble happens the A/F gauge goes full lean and the LED startes to fade, almost as if the signal is weakened. Now is this becasue the O2 is going bad or is it becasue of...