Search results

  1. S

    NHRA rules for battery relocation

    it need to be accessable from the outside on the back or side and can be a push off type or a turn switch.
  2. S

    BACKFIRE!!!

    no, it should still fire up just idle too high. it sounds like your distributor is clocked wrong. put the #6 wire closest to the egr valve and follow the picture above for the rest. firing order is 1-6-5-4-3-2.
  3. S

    SMC Alky kit V.S. Aquamist V.S. Propane

    Re: SMC Alky kit V.S. Aquamist V.S. Propane too much like $400 for the basic kit propane seem like it would be awesome and if you like to experiment, go for it. but i think an awesome alky kit is the tripodi methanol kit. its the only one you can use with strait methanol and unlike any of the...
  4. S

    Help! Plug thread issues

    the turbo doesn't have any gaskets. use a small amount of grease on the sealing surfaces.
  5. S

    Wastegate adjustment rod.....

    its a bitch with the fender well in but not to difficult once you have a technique. i used a pair of needle nosed pliers to pull it over the pin. you can use a mityvac to pressurize the actuator but that seems like a waste of time when you need to make multiple adjustments.
  6. S

    torque converter cover

    i had to manipulate the lines to get mine back up by putting the propshaft side up first and pulling them out of the way of the cover until it slipped in.
  7. S

    Annual FAST meet check in.

    give him my e-mail joda_te@hotmail.com and give me his. the car i went to look at was a piece of shit not worth the gas $$ to go see. i'm lookin at two right now, but they're out of state :(
  8. S

    Orlando, Florida

    hahaha
  9. S

    can i not run a cat converter

    well obviously there are externals. but you can modify the stock turbo to control boost properly. reread my post. there is a florida truck running a setup something similar to what i described in my previous post.
  10. S

    can i not run a cat converter

    the stock turbo will overboost because the wastegate puck only opens about 1/4" and opens toward the corner. if you remove the service port, grind away the material between the two holes and move the pin that the actuator rod connects to closer to the axis you can get away with no cat, no...
  11. S

    Annual FAST meet check in.

    mini's are freakin' expensive there's one for sale near me in mint and they want like $25k for a go-kart! i'm going to look at a 94 supra tt this weekend. :D
  12. S

    Annual FAST meet check in.

    if i can make it i might be rollin' in a new ride.
  13. S

    Starter Click, Click, Click, (insert vulgar Lang.) Start

    has it run recently? or was it in storage?
  14. S

    Exhaust Question

    my truck has had no mufflers or pipe past the cat for more than 6 months. i do suggest getting the pipe for your ears' sake. it is muthafukin loud and resonates the cab. boost control hasn't been an issue.
  15. S

    Starter Click, Click, Click, (insert vulgar Lang.) Start

    the purple wire isn't always the problem. charge the battery and if that doesn't work it may be the starter.
  16. S

    removing cladding

    i used a drill.
  17. S

    "ecm 1" fuse keeps blowing!

    jeremy- i have the wiring diagrams. if you want to drive down to my place you can borrow them.
  18. S

    Heater core blew

    you can drive but you'll get coolant all up in your interior. if you have visegrips lock them onto the hose that goes to the intake manifold or if possible bypass the core completely. higher rpms will make matters worse so drive easy.
  19. S

    O2 simulator

    it runs like ass. i'd try getting a sim or see if keith can work around it.
  20. S

    O2 simulator

    jordan- try caspers http://www.casperselectronics.com or get a saudi chip burned _________________ mike blk/gry sy #1765 <font size=-1>[ This Message was edited by: sy1765 on 2002-04-03 20:52 ]</font>
Top