Search results

What fuel pump will safely fuel a PTE 6262, 60lb injectors, vortec heads, and Steve Morris cam (.530 lift) @ 25 psi? Walbro 340? Does anyone have any experience with the Racetronix RXP340M vs the Walbro GSS340M?

What fuel pump will safely fuel a PTE 6262, vortec heads, and Steve Morris cam (.530 lift) @ 25 psi? Walbro 340? Does anyone have any experience with the Racetronix RXP340M vs the Walbro GSS340M?

What fuel pump will safely fuel a PTE 6262, vortec heads, and Steve Morris cam (.530 lift) @ 25 psi? Walbro 340? Does anyone have any experience with the Racetronix RXP340M vs the Walbro GSS340M?

I need a stock crossover pipe for a SyTy. My original one has a flange welded on for an eternal wastegate. Thanks,

Rebuild is underway and my existing crank needs too much (0.060) to be cleaned up. I am looking for a stock SyTy crank that has been turned 0.010 or less.

Can anyone recommend a good machine shop in the greater DFW or Oklahoma area? I need my Vortecs modified to fit the lower intake. I've read countless threads on this topic, but don't have the equipment to do it myself.

can anyone recommend a paint shop in the dfw area? any first hand experience with shops painting SyTy's?

after a long hiatus from the syty world, including getting married and becoming a dad, I have returned. Syclone 1680 died 2 years ago after blowing the rear main seal. engine and trans removal took about 8 hours and thank goodness we had access to lift. the sawzall made quick work of the...

someone broke into our shop and stole my dad's 1972 SS El Camino. 454 w/ 4 speed all matching numbers. The car is white with blue stripes and the dash is out of the car. the hole in the floor has been modified to fit a hurst shifter. The motor and trans are in the car, but it doesn't run. The...

could someone pm me waller's phone number?

I thought there was a topic on this aleady, but couldn't find it so its time for a new one. Me, my dad and brother are going to Nats in the 'phoon and will probably be leaving from DFW. Who else from TX and OK are going? Tyler (we need to get that truck running) Jeremy ? we could all stop...

I am about to ship a trans to Waller in SC for a rebuild. I got a big container to put the trans in. Now I am looking at all the options to ship it. I searched and found some have used Forward Air. Any details on that? I am sure others have shipped these things and was wondering what the...

The truck has 50lb injectors, TE-61, built tranny with 3K stall, meth injection, and a custom chip from Nolan. Over the last 3 weeks or so, datamaster will not stay connected to the ECM while under boost. It will also disconnect while just cruising, but it only does this occasionally...

The Phoon got the complete Ziano treatment yesterday. 8) Anyone like the wheels? They are polished WS-6 wheels that the previous owner put on. I really don't think they look good on SyTy's, but they don't look too bad I guess. Anyone want to trade? :P Anyone remember Joe Lutz of...

the FedEx man just delivered my wideband from Innovate Motorsports. http://www.innovatemotorsports.com/lm1.php I need to get the bung welded on the downpipe before I can use it. Anyone else out there have one of these? or have any experience with it? Any DFW SyTy peeps that want to try it...

During the fall, I installed some 50lb injectors and Wallers version of the 50lb Ultimate. The truck has a TE-61 with atr dp and wg, 3K stall, built trans and all general sy/ty reliability mods. Also installed a two stage alky system with aquamist jets. The truck idles very smooth and...

there was a post on here a long while ago that had a picture of a truck with shims or spacers on the right side of the frame where the bed bolts to. the right side of the bed of my truck is lower than the left it seems. Its not much, but it is enought to bug me everytime i look at it. When i...

We got some 50lb injectors and Ultimate chip for the typhoon and we are going to install them this weekend. I did some searching and some people say to take the upper intake off and some say it can be done while leaving it on. Is it worth the ease of installation to take the upper intake off...

My headliner has developed a "bubble" where the cloth has come apart from the foam. I checked on gmpartsdirect.com and a new one is 150 includiing shipping. Anyone ever taken one to an upholstry shop to have it redone? anyone every had this problem?

Any one got instructions for the Blitz sbc id or the dual sbc spec R in english? or does anyone know any good japanese translators? :) I picked one up off of ebay from Japan and I was told the manual came in japanese. I sold some parts I had and got the bones to get a decent boost controller...