10 sec part out

[Ryan Heller]

Ryan Heller
Torrington CT
any ? just call
860 485 3896

So i am posting my setup as a feeler just to see if i have any interest and the reason i am selling is because i want to do a LSX swap the setup on my truck made 480 hp and 630 tq to all 4 corners at 20 lbs of boost and no timming on pump gas but i ran out of dyno time and never went back to finish it because that night after the dyno i brought the truck out and blew the trans but now that i have gone this far i know that my goal is going to over power this setup

first is the engine

stock block 30 over 4 bolt splayed and short filled
scat crank treated
eagle rods
je
hi flow oil pump
arp everthing
fully balanced
sfi balancer
double roller timming seup
custom cam shaft

next is upper end

vortec heads fully ported
stainless 2.02 1.60 valves
double springs
comp roller tip rockers
arp rocker studs
arp head studs
mls head gaskets
hardened push rods
comp lifters
billet valve covers with custom breather setup

next intake setup

edelbrock 2114 modded
custom fuel rails
1000cc ID injectors
edelbrock 90
92 mm lsx throttle body

next is the fire

custom wires
digital 6a box
new dis
new msd coil

computer

FAST classic
custom interface harness

boost
custom manifolds v band everthing
borg warner
s366xl
3.5 exhaust

intercooler

4.5 thick garrett core
3in piping
tial bov

misc

4l80e trans cross member
aluminum drive shaft
new hd prop shaft

I am sure i missed alot of the little things but that is alot of the big stuff as for price i will see ih i get any intrest then i will start putting a number to it all

 

[Ryan Heller]

Re: 10 sec part out

 

[dgoodhue]

Re: 10 sec part out

Personally I would start with a different Syclone if you want to do LSX swap and sell the syclone you have.

 

[qbnkiller]

Re: 10 sec part out

Nice combo of parts.... GLWS

 

[Ryan Heller]

Re: 10 sec part out

I don't think I could sell the truck because I would not get the money out of it I have in it

 

[ndburli]

Re: 10 sec part out

How much for the propshaft and alu driveshaft?

 

[RealFastV6]

I was lucky enough to check this truck out when Ryan was building it and it is definitely top notch.

 

[turbocwd]

Re: 10 sec part out

I'll take the 4l80e crossmember shoot me a pm when your ready. Interested in the fast classic also.

 

[bryan]

Re: 10 sec part out

Wow, that truck is just sexy.

 

[T-Bone]

Re: 10 sec part out

Ryan, I have interest in buying all of the intake and boost components you listed.

Also, the driveshaft and propshaft if previous poster passes.

 

[Ryan Heller]

Re: 10 sec part out

Ok well if I get the intersected in the long block we have a go on all this

 

[Darin]

Re: 10 sec part out

Might be interested in intercooler depending on price. I know what I can build my own for, but buying a pre fabbed kit is always nice!

 

[TYHOGG]

Re: 10 sec part out

I'd be interested in the billet valve covers, and the dizzy (if its msd), and coil (any more info?)

 

[bezerk]

Re: 10 sec part out

maybe it would be easier if you just mention a price for the complete trans/engine combo?

 

[Ryan Heller]

Re: 10 sec part out

Not selling the trans and if some one is interested in the motor they will call or pm me

 

[bezerk]

Re: 10 sec part out

i'm intrested in the engine combo. everything except the fast system.

 

[Ryan Heller]

Re: 10 sec part out

Bump
Some one buy the motor so I can sell the rest

 

[doctor_cad]

Re: 10 sec part out

Interested in crank rods & pistons. Any chance of parting out?

 

[Quickstop [UK]]

Re: 10 sec part out

specs on the cam?

 

[Ryan Heller]

Re: 10 sec part out

Sorry guys I won't be parting it out any more I pretty sure the whole truck is sold