wheele rider
New member
I just got tts datamaster so I can record my truck what else do I need to play with tunes or add 3 bar map and turn off egr?
3bar map and egr delete
- Thread starter wheele rider
- Start date
Flyin Ryan
hated cuz he drives fords
Re: 3bar map and egr delete
You should do some searching and reading on here but the short answer is Tunerpro
http://www.tunerpro.net/
You should do some searching and reading on here but the short answer is Tunerpro
http://www.tunerpro.net/
BoostedSUV
Active member
Re: 3bar map and egr delete
TunerPro, a chip burner or ostrich emulator.
TunerPro, a chip burner or ostrich emulator.
wheele rider
New member
Re: 3bar map and egr delete
Where can I get the chip burner and ostrich emulator?
Where can I get the chip burner and ostrich emulator?
DubJG
Member
Re: 3bar map and egr delete
You only need one or the other depending on whether you want to pull your chip and reburn it for all your changes or if you want to emulate on the go.
moates.net is where I got my aldl cable, ostrich emulator and G1 adapter but Hood at hoodtuned.com sells a complete tuning package that includes all of these. You would also want a wideband O2 sensor patched into your ecm. Also make sure your truck is in excellent running condition before you tune, i don't think it's possible to tune out something broken.
Do ALOT of reading here in the tuning section as well as code59.org before you begin any tuning whatsoever. It will help you understand what you are actually doing with all of the products I listed.
You only need one or the other depending on whether you want to pull your chip and reburn it for all your changes or if you want to emulate on the go.
moates.net is where I got my aldl cable, ostrich emulator and G1 adapter but Hood at hoodtuned.com sells a complete tuning package that includes all of these. You would also want a wideband O2 sensor patched into your ecm. Also make sure your truck is in excellent running condition before you tune, i don't think it's possible to tune out something broken.
Do ALOT of reading here in the tuning section as well as code59.org before you begin any tuning whatsoever. It will help you understand what you are actually doing with all of the products I listed.
BoostedSUV
Active member
Re: 3bar map and egr delete
Moates.net.
I have a G1 adapter, blank chips, a burner and software that I might sell. I just bought an ostrich emulator instead.
Moates.net.
I have a G1 adapter, blank chips, a burner and software that I might sell. I just bought an ostrich emulator instead.
wheele rider
New member
Re: 3bar map and egr delete
If I use an emulator do I always have to have the laptop in the truck plugged in at all times or is it like reflashing the computer? Sry I'm new to all this thanks for all the input..
If I use an emulator do I always have to have the laptop in the truck plugged in at all times or is it like reflashing the computer? Sry I'm new to all this thanks for all the input..
BoostedSUV
Active member
Re: 3bar map and egr delete
no. You will only need to hook up a laptop when making changes or datalogging. The emulator just allows you to make changes on the fly with out pulling the chip and reburning it.
no. You will only need to hook up a laptop when making changes or datalogging. The emulator just allows you to make changes on the fly with out pulling the chip and reburning it.
wheele rider
New member
Re: 3bar map and egr delete
Oh ok so Ican tune it with out haveing to pull the chip and reburn.. how does the emulator hook up? Is there any soldering involved?
Oh ok so Ican tune it with out haveing to pull the chip and reburn.. how does the emulator hook up? Is there any soldering involved?
BoostedSUV
Active member
Re: 3bar map and egr delete
It is completely plug and play with the G1 adapter (adapts to our ECM). You will just need to download a starter .bin (tune) to work with with. The ostrich is about the size of a deck of cards acts as your chip that you can change tunes on fly.
It is completely plug and play with the G1 adapter (adapts to our ECM). You will just need to download a starter .bin (tune) to work with with. The ostrich is about the size of a deck of cards acts as your chip that you can change tunes on fly.
wheele rider
New member
Re: 3bar map and egr delete
Sweet thanks for everything ;-)
Sweet thanks for everything ;-)
wheele rider
New member
Re: 3bar map and egr delete
So I have a few more questions.. I was looking at emulators today and I seen a couple on moates a ostrich 2.0 and a all in one. Which is the right choice? And I just ordered a aldl to usb cable should I send it back? I was gonna use it for datamaster so I could datalog.. can I datalog with a emulator?
So I have a few more questions.. I was looking at emulators today and I seen a couple on moates a ostrich 2.0 and a all in one. Which is the right choice? And I just ordered a aldl to usb cable should I send it back? I was gonna use it for datamaster so I could datalog.. can I datalog with a emulator?
DubJG
Member
Re: 3bar map and egr delete
Im not sure what moates has that's all in one, link? The ostrich 2.0 is what most are using to emulate. You need the aldl cable to datalog with tunerpro as well as the emulator to tune your chip, both will be plugged into your laptop at the same time. Datamaster is a good tool to use too. Alot of members can here can help you read your datalogs from datamaster to tell you what your truck is doing as well as tunerpro.
Im not sure what moates has that's all in one, link? The ostrich 2.0 is what most are using to emulate. You need the aldl cable to datalog with tunerpro as well as the emulator to tune your chip, both will be plugged into your laptop at the same time. Datamaster is a good tool to use too. Alot of members can here can help you read your datalogs from datamaster to tell you what your truck is doing as well as tunerpro.
wheele rider
New member
Re: 3bar map and egr delete
http://support.moates.net/2008/09/17/autoprom-apu1/ . Can you datalog with turnerpro?
http://support.moates.net/2008/09/17/autoprom-apu1/ . Can you datalog with turnerpro?
DubJG
Member
Re: 3bar map and egr delete
Oh i see, someone else will have to chime in on that one, I've never used the apu1. Yes you can datalog with tunerpro.
Oh i see, someone else will have to chime in on that one, I've never used the apu1. Yes you can datalog with tunerpro.
wheele rider
New member
Re: 3bar map and egr delete
So I will still need the aldl cable to datalog with tunerpro or datamaster. My .laptop only has usb ports do I need anything else to datalog or just the usb to aldl cable?
So I will still need the aldl cable to datalog with tunerpro or datamaster. My .laptop only has usb ports do I need anything else to datalog or just the usb to aldl cable?
BoostedSUV
Active member
Re: 3bar map and egr delete
Just the cable and the software to datalog.
Just the cable and the software to datalog.
wheele rider
New member
Re: 3bar map and egr delete
So I need the aldl cable, datamaster or tunerpro, and a emulator? Is that right?
So I need the aldl cable, datamaster or tunerpro, and a emulator? Is that right?
BoostedSUV
Active member
Re: 3bar map and egr delete
You will also need a G1 adapter, qne you should have a WBO2 and you will need to download starte tubnes that you will have to dial in
You will also need a G1 adapter, qne you should have a WBO2 and you will need to download starte tubnes that you will have to dial in