anyone have problems with ur5 plugs?

Makaveli

New member
I just put in the UR5's a week ago and everythings going smoothly so far. Not real sure what to look for though, just got the truck, and have only been in one other one. What kind of problems are you having?
 

badas1

New member
i am in the process of tuning my pt52 setup and it was running good.i changed the plugs and now when it gets into the boost it starts cutting out and running real bad.i double checked the plug wires.i am frustrated at the moment. :evil: :evil: it is driving me crazy.
 

2cold

New member
make sure you didn't crack any of the porcelin insulators on the plugs when you were installing them.
 

smeagol

Active member
This is simple... try troubleshooting more difficult problems.

You change something, and you have problems afterwards. Fix whatever you changed, cuz you did something wrong.

You changed plugs and had problems afterwards, so....

- a plug is bad, gapped wrong, cracked
- a wire is bad, not connected 100%, burned

Don't drive yourself nuts over this, it is a simple solution. I wouldn't question the model of plugs, we've run the UR5's pretty hard so far with better results (IMO) than the AC's. Question the installation & other issues. We've all been there.
 

badas1

New member
pulled the plugs out today and #2 was cracked.thanks but i had to vent yesterday.back to the tuning process. :lol:
 
Top