autoaddictions
Active member
Well for the last few weeks Ive been trying to figure out how to make my 4l80e shift at 5500rpm. Ive been shifting at 6100 1st and 2nd gear and i know this was hurting my ET as the cam is out of power at 5700. My problem is the big stuff 3 system tells the trans when to shift using MPH and it will not let lower the MPH enough to get it thare 44mph for 1st and 77mph for second. Both these shifts at well over 6000 rpm. So i thought id tell the computer that i was using a 355 rear end ratio to try to trick the ecu into thinking i was going faster than i really was Thus shifting it sooner!! Whoops I went the wrong way And it shifted at 6200 and hit the rev limit top of 2nd gear you can here it in the video at .026. on the ride home i figured out i went the wrong way. I went up instead of down on the gear ratio. I tryed 290 on the drive home and it shifted right at 5500 1st and 2nd. So back to the track Thursday night to se if it likes the shift piont changes. I still managed a 10.90@125 liftin after the pop of the rev limiter Scared the shit out of me though!!!!!1
Heres the video you can here the pop at 26 sec in.
http://video.google.com/videoplay?docid=-4087051740827324834
Heres the video you can here the pop at 26 sec in.
http://video.google.com/videoplay?docid=-4087051740827324834