boost goes up in OD

Tyrant

New member
while doing a diacom run yesterday..........i was at WOT and hitting 18 psi.....well as soon as my tranny shifted to 4th it went up to like 24-25 psi.......what could cause this...........

things i have modded

PTE 52 & 3" D/P
High Flow 3" Cat(no Muffler)
50lbs Inj.
manual boost controller
ATR underdrive crank pulley
L35 heads (Stock Valve Size)
Comp Cam (422)
1.6 roller tip rockers
custom chip
Hartman T/C
TRW Pistons (.030)

if u have any idea's why the boost raising so much just in 4th please let me know.......

thanx in advance

Jake aka OREO
92 TY
 

jwaller

Evil Genius/SyTy Guru
this is normal boost control problems.....you have the PTE setup...which is better.. but you just need to dial it in better.... WOT in OD with conv locked is when the engine see's the most load...this is also the same time you'll prob notice knock...if you have any.
 

Tooky

Serious about performance
Damn, that is not the "rock solid boost control" I have heard the PTE known for, at all. What type of manual boost controller are you using (is it a bleed valve or a grainger valve?)? Can you email me one of your Diacom runs showing this, tookycat@nconnect.net Thanks
 

Tooky

Serious about performance
I may have found your problem. Your engine is running too cool. The Torque Converter Clutch does not lock up until you reach 150*F. Your truck is in the 140*'s down the quarter mile until you coincidentally reach 150*F when you hit overdrive, and suddenly the TCC finally locks and your boost rises.

My suggestions are:

- Put in a 160*F RobertShaw gold-can thermostat ($5 at AutoZone P/N 333-160) instead of whatever you have in there now that is keeping your truck too cold.

- Try turning your manual valve down all the way, or run a line straight from your turbo compressor housing to the wastegate actuator, and see what you get. I dont have a PTE kit myself but I have heard it should maintain 15 PSI which seems to be your goal here anyhow.
 

Matthew Little

New member
OD boost problem

OD boost problem

This is not just a problem related to syty's. My turbo dsm and my friends supercharged grand prix does the same thing. My ty also has the same thing happen. Even most electronic boost controler won't help this because they don't moniter the boost. I hae a apexi on the eclipse and it acts the same as the man. controlers. The tq lock up may add to some of this as stated above, but my eclipse does the same thing and it's a five speed. One of my friends and I are building a boost controler that uses a pressure sensor to keep the boost at a good even level. We are not building anything with alot of flash,just an electronic controler that get the job done. Let me know if anyone is interested and I will let you know how the project is going.
Thanks, 92 ty #0194
 

Tyrant

New member
this weekend im gonna change out my thermostat to a new 160......i think mine may be sticking open a little bit......and im also gonna lower my TC lockup temp on my chip.......ill keep everyone updated.....

Jake aka "OREO"
92 TY
 

Irid

New member
Matt if you are still getting boost creep using an electronic controller it's because your wastegate is too small and simply can't flow enough to regulate the boost properly.
 

Matthew Little

New member
boost

boost

All my cars have the stock turbos, seen this on gn's too, but nobody really has a good answer for this. Also have seen this on more cars with ball and spring bleaders.
 
Top