casting # 10045449
These where for my Bowtie build, i bought a pair of splayed valve heads instead, so these are for sale.
every part of these heads have been gone through, brand new guides from Brodix,new inconel ex valves, all new bearings in the Jesel rockers, valve springs, titanium retainers, decked and ready to run!!!
valve springs are setup to run solid roller
when i got these heads one piston had smacked a chamber bending both valves, and left a small dent in the chamber. The head was pressure tested and sent to Brodix to have the dent welded up
one rocker was damaged, it was sent to Jesel they made a new one, that's why there's one silver rocker
as they don't anodize them anymore
The titanium intake valves where inspected and reused minus the bent one, it was replaced with a new one.
i took them back apart to surface then as they missed a little nick, they will be reassembled tomorrow and ready to ship, and i will take pics after they're back together.
with the heads will come a pair of cast aluminum valve covers, set of push rods (these might not work on every setup as deck heights can very, be sure you install the correct pushrod for your setup)
set of offset solid roller lifters will be included, there's a few of the rollers that need new bearings, i believe they are crane lifters and the bearings can be replaced the bodies are in great shape
NOTICE:
you will need a custom intake or find the carb intake designed for these heads and convert it to EFI
these heads need to be ran with a 4.125 bore or bigger
Price 3000.00 obo plus shipping, pm any serious offers
these heads will make some big power, even at lower lift they flow tons of air, means you could run a fairly mild .600 lift cam and make big power
with in the next few days i will be listing a 388 bowtie block that would go nice with these
These where for my Bowtie build, i bought a pair of splayed valve heads instead, so these are for sale.
every part of these heads have been gone through, brand new guides from Brodix,new inconel ex valves, all new bearings in the Jesel rockers, valve springs, titanium retainers, decked and ready to run!!!
valve springs are setup to run solid roller
when i got these heads one piston had smacked a chamber bending both valves, and left a small dent in the chamber. The head was pressure tested and sent to Brodix to have the dent welded up
one rocker was damaged, it was sent to Jesel they made a new one, that's why there's one silver rocker
as they don't anodize them anymore
The titanium intake valves where inspected and reused minus the bent one, it was replaced with a new one.
i took them back apart to surface then as they missed a little nick, they will be reassembled tomorrow and ready to ship, and i will take pics after they're back together.
with the heads will come a pair of cast aluminum valve covers, set of push rods (these might not work on every setup as deck heights can very, be sure you install the correct pushrod for your setup)
set of offset solid roller lifters will be included, there's a few of the rollers that need new bearings, i believe they are crane lifters and the bearings can be replaced the bodies are in great shape
NOTICE:
you will need a custom intake or find the carb intake designed for these heads and convert it to EFI
these heads need to be ran with a 4.125 bore or bigger
Price 3000.00 obo plus shipping, pm any serious offers
these heads will make some big power, even at lower lift they flow tons of air, means you could run a fairly mild .600 lift cam and make big power
with in the next few days i will be listing a 388 bowtie block that would go nice with these
Last edited:
