Chrome GMC Grille Letters

SYO237

SyTy Registry
local FL resident took his to a chromer who actually could chrome plastic. its held up great now for years. although, his truck is a garage queen too :p


hes gotten some underhood plastic stuff done as well.


one thing to note, he paid some bucks to have it done. not everyone does plastic chroming.
 

syclonekid43

New member
just get so chrome vinyl(sp) . i redid mine with carbonfiber to match my taillights.

fixing_sy_235.sized.jpg
 
epix said:
roberto, where you find the vinyl? and how do you attach it?
I have seen the vinyl and cut a sample piece. I thought about getting a roll of it for my stock but feared it would sit longer than it took to use it up. Does anyone else out there want decals/logo's cut in carbon fiber vinyl? I thought about trimming GT#549 with it in places like the mirrors, tailight trim etc. Not convinced it would look right yet. Maybe some of you can share your opinion?

Anyway, I can get a roll of carbon fiber vinyl and cut it to specs including decals if enough of you want it. Basically, I'm not buying a roll for one person unless they want most of it. It's $5-$10 a foot depending on size needed and comes in Red, Yellow, Blue, White and Black(dk gray). Post or PM me if you want more information.
 

Captain Morgan

Moderated User
roberto said:
just get so chrome vinyl(sp) . i redid mine with carbonfiber to match my taillights.
chrome vinyl is not at forgiving as standard vinyl, its actually a little harder and thicker film thats used, or at least that I have used.
 
NJTy180 said:
roberto said:
just get so chrome vinyl(sp) . i redid mine with carbonfiber to match my taillights.
chrome vinyl is not at forgiving as standard vinyl, its actually a little harder and thicker film thats used, or at least that I have used.
Yes, the crome vinyl is typically a little heavier but there are different grades that may be thinner... however the carbon fiber is more forgiving and can be stretched a bit for curved shapes. Don't get me wrong, you can't carbona bowling ball, doesn't give that mutch. Anyway I have been thinking about this all day and I just might go ahead and get a roll of the black or natural as some say. I'll let you all know how workable it is.

Maybe I'll carbon my grill leters for a test.
 

syclonekid43

New member
epix said:
roberto, where you find the vinyl? and how do you attach it?

i got it from the local speed shop. i cut a piece to fit over the letters. worked it in to get the bubbles out. and just traced the outline with an exacto knife.im sure if you cant find it at the speed shop. maybe a pepboys or autozone might have it to. i think the company that made it was pilot. all else fails look on ebay
 

turbotyphoon69

New member
i just took a heatgun to the letters and pryed the red letters off and left te chrome backing, looks really good when cleaned up and all the glue is off. IMO :lol:
 

AUSyTyIN

Unbusted $#it box
turbotyphoon69 said:
i just took a heatgun to the letters and pryed the red letters off and left te chrome backing, looks really good when cleaned up and all the glue is off. IMO :lol:

Got a pic?
 

turbotyphoon69

New member
i don know how to post pics but i can email it to ya.



btw:i wish i would have known about the cheville before, because i know some one who was interested in that trade.
 

gmcturbo

Active member
i believe jason (loeryder) just popped the red part of the letters off and they're chrome. i dont remember how good it looked though.
 
I have the chrome vinyl for anyone that wants a piece big enough
to cover the letters. I have found that the best results come from
trimming around the letters once the vinyl is installed. I tried cutting
the letters first and it was ok, but you have to use the "wet method"
of application to align them perfectly.

For $1 I'll send you a piece of chrome vinyl big enough to cover the letters.
I also have other colors and carbon fiber. PM me if you are interested.
 

Josh in RI

New member
Hello all,
I've done all of the Ty logos and the GMC on the grill and center caps on stock wheels with MIRRORED vinyl. This stuff was designed especially for vehicle graphics. The only thing, is when you apply it, you HAVE to put it on strait and in the right spot the first time, or the adhesive becomes garbol. However, the best way I found to do it, is to wash the area you're gonna apply it to (paint, window, ect.), dry it good, and let the area sit in the sun for at least a half an hour. Once the adhesive is heated, it's almost like an epoxy. To smooth the decal while applying, use a credit card or id to rub out the air bubbles (if any). The mirrored vinyl holds up really good except on the back window from the wiper passing over it. Some of the edges are starting to peel. If anyone knows how to put/get pics onto this forum, please let me know. I've got quite a few cool pics of my Ty that I'm dying for everyone to see. Contact me about the mirrored vinyl too if your interested. Thanks, Josh
 

Cyber Brat

New member
I think I am going to buy a peice of aluminum and cut/die grind them to match the factory letters. Then polish them up something fierce.
 
Top