coil schematics

[RichHeezee01]

Anybody have the stock wiring coil schematics? I have been using search for a while and can't find any. I also can't find my repair manuals. If this has been posted before I am sorry. I ripped out the msd system that came with the truck when I bought it and I am installing a stock coil. I just want to make sure everything is wired up correctly and to not use any of the spagetti that the @$$hat had done to the truck. Any help would be appreciated. thank you.

 

[jwaller]

2 wires go from the coil to the dist and 2 go to the main harness.

the coil to dist is the same little patch cable that s-10's use. (about 6inches long small red/white wires)

the coil to main harness connector plugs into the coil via connector that sits on the back of the coil/dist harness. (larger red/white wires)

 

[RichHeezee01]

So, I should have 2 plugs separate on the back of the coil? (I have that newer part# coil) one plug from the distributor? (red and white) one plug from the main harness? (Larger red and white) Sorry, that I am slow. I know this is such a simple thing. I jus want to get this right because the wiring was such a mess when I got it and I never saw this thing stock. It's like I am working backwards.

 

[jwaller]

yes you should have 2 sets of 2 wires.

a pair coming from the main harness.
another pair going to the dist.

 

[RichHeezee01]

thanx for your help. I appreciate it.

 

[skata]

where does the pair from the main wiring harness go? ecm? key-ignition?