concept cladding from GM maybe?

ghettogmc91

ghettogmc91

New member
Anyone have any info on these? They are a full set for all four wheels and they had side skirts to match that i didnt pull and a hood scoop that was already gone. The truck was a 1988 s10 with a 2.8 Liter, 5 speed, 2wd. I pulled the flares but have never seen any others like them. They each have a part number on them but ive searched and found nothing even reported as far as being an actual part number. I can post the numbers if it would help. Just tryin to figure out what i stumbled upon amd knew if anyone would know rare s-series parts they would be on here,

Personally i think it kind of looks like a Trans Am color scheme so maybe like a pontiac crossover? Similar to the buick/ s10 turbo concept without the turbo lol.

We tried running the vin number and the glovebox codes but neither of them showed anything really out of the ordinary. It did have a badge by the tail light but they had been pulled. They were stick-on not bolted

ANY info at all is much appreciated.

Thanks,
Josh

524651_593852280629237_847004112_n.jpg

563500_593852247295907_1957220132_n.jpg

377698_593852213962577_827554312_n.jpg

292829_593852157295916_1833125193_n.jpg
 
warmpancakes

warmpancakes

New member
Re: concept cladding from GM maybe?

peel and stick, highly doubtful to be factory, what are the numbers on the pieces
 
ghettogmc91

ghettogmc91

New member
Re: concept cladding from GM maybe?

Not really peel n stick. It has rails that bolt to the fender with tape behind it, but the flares themselves bolt under the lip and lock to the rail on top.
Part number on drivers rear is
4233-A
00-9450-105 L.H. / DRIVER REAR
Numbers on the rest are fairly close to that
 
ghettogmc91

ghettogmc91

New member
Re: concept cladding from GM maybe?

On the rest of it, it's still at the yard but if it turns out to be worth anything ill pull it all to save it from being crushed
 
ghettogmc91

ghettogmc91

New member
Re: concept cladding from GM maybe?

Not too expensive. I pulled a full bravada cladding set for my 2nd gen for less than $100. I just didn't bother with the rest cuz it's for an s10 not a blazer. Next time I go ill pull it tho just so it's not wasted
 
ghettogmc91

ghettogmc91

New member
Re: concept cladding from GM maybe?

scottyblazinlow said:
were did you get the side skirts?
Click to expand...

I got the side skirts from stillen.com

Top Gun package. Okay I searched and from what I'm finding it was just a ground effects kit by Choo Choo Customs correct? So not really sought after but still worth picking up it sounds.

Thanks guys, definitely happier to know what it is lol. It was starting to bug me a little.
 
Blazerspeed

Blazerspeed

New member
Re: concept cladding from GM maybe?

There are quite a few guys on S10 forum that have been looking for those. I had talked with 92TYPHOON937 on here about this a while ago. He has this kit, but (as of the last time) it was incomplete. Maybe he'd be interested in a few pieces?
 
Jimmy

Jimmy

Banned
Re: concept cladding from GM maybe?

The Sonoma SST was the best one they did.

I wanted to bitch slap whoever did the El Camino shit.
 
92TYPHOON937

92TYPHOON937

Active member
Re: concept cladding from GM maybe?

i sold my kit for almost nothin nobody round here wanted it and i diddnt need it and it was takin up space lol
 
You must log in or register to reply here.
Top