I wrote up a list of all the parts you'd need to duplicate my ABS kit (both hard and braided) but I'll do it again.
The same applies for both kits (though part numbers are different). Below are the line lengths:
Front:
Hard - 20" (Everco BL320PM)
Braided - 18" (Earls 64191918ERL)
Rear:
Hard - 27" (Everco BL430PM - cut off 3" and reflare)
Braided - 18" (Earls 64191918ERL)
Side:
Hard - 5" (Everco BL308PM - cut off 3" and reflare)
Braided - 6" (Earls 64191906ERL)
Most parts stores will carry prebuilt hard lines in various lengths. Get equivalents to the numbers above. Below are the fittings:
Front Line @ Prop Valve:
Hard - Included with prebuilt line
Braided - Earls 591972ERL
Front Line @ Tee:
Hard - Included with prebuilt line
Braided - Earls 591972ERL
Rear Line @ Prop Valve:
Hard - Edelmann 121045
Braided - Earls 592047ERL
Rear Line @ Union:
Hard - Included with prebuilt line
Braided - Earls 591942ERL
Side Line @ Tee:
Hard - Included with prebuilt line
Braided - Earls 591972ERL
Side Line @ Wheel Hose:
Hard - Included with prebuilt line
Braided - Earls 591972ERL
For both kits you will need a 3/16" Brake Line Tee. The Edelmann # is 130333. The rear union is already on the truck and is used with these kits, but just discard the front union (replacing it with the tee).
So there you have it.....the secrets to the $20 hard line kit and the $85 braided kit. Now everyone go make your own and don't buy mine anymore. :roll: