Everyone with insanely fast trucks...

[myclone]

FWIW mines 3,440lbs without my fat 270lb self sitting in it (weighed at a certified scale at the local truck stop).

FWIW II 2200lb on the front wheels and 1240lbs on the rear wheels according to the printout.

 

[Jer]

FWIW mines 3,440lbs without my fat 270lb self sitting in it (weighed at a certified scale at the local truck stop).

Now that's bad when you need a truck scale to weigh yourself! :lol:

 

[ed hess]

FWIW mines 3,440lbs without my fat 270lb self sitting in it (weighed at a certified scale at the local truck stop).

FWIW II 2200lb on the front wheels and 1240lbs on the rear wheels according to the printout.

hey myclone

wow! 270 guess its safe to say mrs myclone can make some wicked ribs and wings huh!

ed<---- waitin to see if its gonna dry off here to go to atco tonite!

 

[mhoover]

with me in it, im 220 lb, our truck weighs 3500 lbs. our cage only added about 60 lbs when installed. we have replaced several thing in our truck to get the weight down
MATT

So Matt

Just how much stuff did you remove to get it that light? Iv'e removed alot from mine & it's still 3510 if I remember right. Then add me & my gut at 240.

well..... 1st thing is the seats. the drivers seat weighed 52 lbs the passenger was about the same. the kirkey seats weigh 6 and 8 lbs. the carpet with insulation weighed 22-24 lbs. we replaced it with a thin light weight copy with no insulation and it weighed about 5 lbs. since we dont drive it in the rain we removed the wipers and motor, i think about 6-7 lbs. no AC, no ABS, no stock gas tank. there were a few more things but i might have to actually think a little to remember! :-? dad would have some things to add, bc im sure there would be things i am missing.

 

[myclone]

You guys are just a regular riot arent ya :roll: .... (ok, that was pretty funny).

Matt,

Did you guys take off the rear overload spring in each side? How bout those reinforcement bars going from the frame to the ends of the front bumper cover support? Still got the inner fender wells on it?

 

[Jer]

You guys are just a regular riot arent ya :roll: .... (ok, that was pretty funny).

I'm allowed to make cracks like that because I weigh the same ~270 8)

 

[decodave]

Well, I have done flex-a-forms, dustin's front suspention, fiberglass hood, used a hole saw in certain places, changed to man. steering (which I think I'm changing back) bumper braces, removed stuff on the CAC & something else I can't remeber.
I guess it all depends on how non-stock we want to go.