first data log

[Sy370]

would someone be willing to take a look at a dm file and tell me what is going on. I recorded it just driving around, trying to get a little understanding of what to look for and what I am looking at. still trying to figure out how to post it. thanks
rik :lol:
________
KADETT

 

[Sy370]

Re: first data log

can't figure out how to post the files, can I email them to someone, anybody up for it?
thanks
________
Avatar: the last airbender advice

 

[PPI Typhoon]

Re: first data log

You can send them to me, I'll post them for you

dan@danhanisch.com

 

[PPI Typhoon]

Re: first data log

Here ya go:

http://www.danhanisch.com/SyTy/AutoLog_002.uni

 

[Sy370]

Re: first data log

thanks ppityphoon
does anyone see anything i should be aware of. I realize the knock, working on that, just not sure where to start. I did the regular tune up after this run, still figureing out how to post it. thanks
________
VOLCANO DIGITAL VAPORIZER

 

[mrweelr]

Re: first data log

Took a look at your DM file. Some things to work on:

-High knock retard at WOT. May want to run some higher octane fuel.
-Coolant temps should be 30F cooler. Try WaterWetter, synthetic oil, 160 thermostat, cowl hood etc.
-Your TPS% is not reaching 100, maybe your floor mat is interfering with pedal travel?
-TPS voltage seems lower than normal at WOT. May want to replace the sensor.
-Running on the rich side (O2 Mv). May want to adjust base fuel pressure or recal your chip.
-Getting some DTC error codes, but I couldn't tell what they were.

One good thing I noticed is your voltage is really strong, even at WOT. Happy tuning

 

[Sy370]

Re: first data log

thanks mrweelr
i appreciate your input, i am working on the knock, i have a pump on its way for ic. looking for a sensor as i type. will be working on getting everything going good. thanks again.
________
Ford Ranchero Picture