Follow up (ATR Headers)...

nick041881

Member
ok...so i paid Atr their crazy price of 1k like 3 weeks ago and they told me it would be 3 weeks until i get them. called a week ago just to see how things were going. guy answers the phone says" you will have them in a week and a half or less." im thinking finally !!!!

called today.. lady answers tells me they wont finish production on them until the end of august!! i question what she says compared to the last guy i spoke to. she says " well, no guys answer the phones around here so i dont know who you talked to. whoever they were they didnt know what they were talking about"
WTF ??? these guys playing tricks on me or what?? Anyone else been waiting a long time and getting the run-around from them ??? glad to see our vendors love us so much.....
:cry:
peace,
nick
 

Rick Krupa

New member
Nick,

Of all the years we have been dealing with ATR, I have never spoken with a guy who answered the phone so I'm not sure who you spoke with. We have a customer waiting for a set of their headers since 6-19-02. We knew there was going to be a delay and sometimes things happen especially if a manufacturer is waiting on some parts from someone else being that I believe they said they were waiting on some collectors.

On top of this they have been backordered on most of their exhaust systems and are just getting caught up. The bottom line is, if you don't want to wait on something which there are not alot of companies making for our trucks either make your own, find someone to make you a custom set, get a set of KB headers or find a set of used ones.

I was told they should be finishing up around 10-sets this week so you might want to check with them to see what number you are on their list.
 

Falco

Donating Member
NWSTP Eastside said:
call and cancel order.

you don't need them to go fast...GRIN

Hehehe. That's true. The Canadians just made me an extra grand to spend elswhere... Thanks guys! :lol:

Later,
 

nick041881

Member
ya your right Rick....but its just so damn frustrating!!! i think i will call them and see what # i am on that list. guess i just needed to vent.
peace,
nick
 

turbotruk

New member
Well I'm not surprised that Applied is still operating the same old way.

I first dealt with them 10+ years ago and had exactly the same experience you're having today. And yes everytime you call you get a different answer from the last time and of course they deny saying what you were told the previous time.

It seems they are great at taking your credit card and order but when it comes to having/shipping the part they seem to have a top 10 list of excuses.

The first time this happenned I gave them the benefit and didn't hold it against them but a year later when I experienced the exact same thing, again of not shipping even when they told me the part was in stock, I vowed not to buy from them ever again.

This is just my experience with ATR but it seems like I am not alone. There are other vendors out there but if you feel the need to buy from ATR by all means use a credit card so if they don't ship you can call your bank and reverse the charge.
 

smeagol

Active member
Not to sound like a snot here, but I'm still playing the skeptic on their build - I am blown away by the truck, don't get me wrong!

What if they tear that motor down and find out that high back pressure from the stock manifolds created incredible heat in the heads & exhaust manifolds, and caused damage?

We still don't know that this truck will stay together for a while, and that there isn't any damage already. They did spend some time dyno testing it, but everyone knows that a motor always is strongest right before it blows up ;) (egads I should make sure Tony & Nolan don't read this thread, it may jinx them)

All I'm saying is don't take one truck's results as gospel to dispel everything we thought we knew. The Buick guys have shown that yes, you don't need this part and that part to go fast... but if you do use the upgraded intercooler, or headers, or turbo... you may go faster a lot easier and safer (less chance of detonation). Tim Stockwell's Buick ran incredibly fast with few mods, yet Buick guys all over are still doing aluminum heads, camshafts, and front mount intercoolers to run 10s....

I am still a believer that headers are a *good* modification for big power levels... as far as bang for the buck... probably not. Are they necessary for 10s? Doesn't look like it.

Is everyone going to stop running ported heads?? I doubt it, and I don't think anyone should stop.

I'm planning a motor build similar to the Canadians; I have been for a while. If I find out that in 2 weeks they blow up.. I may change my plans, or change my goals. If it stays together and runs strong, I'll stick with that layout.

With all that said, I obviously wish them the best, and hope that they have stumbled on to a bad ass combo that is easily copied. I'll definitely be watching their progress like a hawk. I know Nolan keeps tabs on the computer data, and that Tony does leak down checks religiously, so we'll probably hear how it goes.
 

Tydriver

TurboLS6 Powa'
Rick Krupa said:
Wonder what the Canadians would have run with headers? :lol:

I'll tell ya what they'd run... They'd run out of gear... Thats what Nolan said to me.. Something like 6-8mph more in the quarter would be against the rev limiter..

Tony actually bounced off it once on one of his runs, (not sure if was the 10.7 pass) but Nolan was concerned that they would hit the 5900rpm limiter.

Perhaps he can chime in here and share his thoughts


damn canadians, always running the wrong combo... :roll:
 

10secTy

Sy-Ty builder and Tuner
I agree Brian. We will be pulling the motor over the winter to do a very close inspection of everything. Like you all know Tony is on a buget so blowing up is not a option. The stupid part is that there is more in the truck. I did not have the Dyno tune in the truck for the 10.71 run. It was rich, had less timing and less boost.
We already went and talked to our engine builder, he wants a look in side to make sure all is well. Being that we are pushing the envolpe I like to err on the side of caution. :wink:

As for headers well to each his own. The money was not in the budget.

We will keep you posted on our finds. Tony is probly leaking down the motor as I type. The truck has been running 4 weeks and Tony has leaked it down about 6 times already.

Nolan Nykyforuk
 

10secTy

Sy-Ty builder and Tuner
Tydriver said:
Rick Krupa said:
Wonder what the Canadians would have run with headers? :lol:

I'll tell ya what they'd run... They'd run out of gear... Thats what Nolan said to me.. Something like 6-8mph more in the quarter would be against the rev limiter..

Tony actually bounced off it once on one of his runs, (not sure if was the 10.7 pass) but Nolan was concerned that they would hit the 5900rpm limiter.

Perhaps he can chime in here and share his thoughts


damn canadians, always running the wrong combo... :roll:


Well the rev limiter is set to 6200 rpm I hate the thought of turning off the fuel pump at 6000RPM and 26psi. :eek:

If all goes well and the motor looks peachy then more boost and a 3-4 shift will take place.

If you keep the RPM down and the knock to zero we are hoping it will live.
Hopefully we can learn from those damn Buicks that run 9's :eek: on the stock block and crank.


Nolan Nykyforuk
 

Rick Krupa

New member
As far as headers go, I guess it all comes down to your goals and how fast you want to go and what your budget is. Just ask the Buick guys.
 

Rick Krupa

New member
Tony,

BTW, last I heard Dean was also building a monster up their in Canada. Did he get a chance to bring it to the Nats being that I couldn't make it so I don't know and I haven't heard anything on his in a while.

Keep up the good work!! :D
 
Top