Fuel Line - braided from filter to rail

[Daron]

I'd like to re-do the fuel line in my syclone from the filter up to the fuel rail. Anyone done this recently and still have all the part numbers handy for the fittings?
Thanks

 

[NJ93TY]

Re: Fuel Line - braided from filter to rail

Good post, I am going to do this one day also.
Edit: Found this in search. OE but looks discontinued.
15661591 return, 15661592 pressure

 

[TYTILIDIE]

Re: Fuel Line - braided from filter to rail

If I'm not mistaken, RPM sells what you need for that project
http://www.sytyperformance.com/inde...facturer_id=0&option=com_virtuemart&Itemid=26
http://www.sytyperformance.com/inde...facturer_id=0&option=com_virtuemart&Itemid=26
Or just the fittings
http://www.sytyperformance.com/inde...facturer_id=0&option=com_virtuemart&Itemid=26
http://www.sytyperformance.com/inde...facturer_id=0&option=com_virtuemart&Itemid=26
http://www.sytyperformance.com/inde...facturer_id=0&option=com_virtuemart&Itemid=26

 

[blk00z28]

Re: Fuel Line - braided from filter to rail

Well I asked my post to be vaulted, but apparently it takes an act of god to get anything like that done.

Search under my name for threads made, then complete braided fuel lines. I did from the tank to the rail.

 

[MikeRenz]

Re: Fuel Line - braided from filter to rail

Well I asked my post to be vaulted, but apparently it takes an act of god to get anything like that done.

Search under my name for threads made, then complete braided fuel lines. I did from the tank to the rail.

remember you also don't have stock rails, so the fittings you used aren't universal to everyone.

 

[blk00z28]

Re: Fuel Line - braided from filter to rail

True. Only because I didn't have a stock rail handy or I probably would have listed a size fitting for them.

Here's the link: http://www.syty.net/forums/showthread.php?t=71359

I didn't put part numbers as some aftermarket companies use different ones. But if you type in those sizes for fittings you should find what your looking for rather easily.