GM High Performance article - Turbo V6

Quickstop [UK]

Combating adversyty.
I was looking for info on an oil pump and found this:

http://www.gmhightechperformance.co...k_turbo_v6_engine_build_bottom_end/index.html

Is the guy he mentions in there "Merk" from this site?

Can you explain the boost plate?

Also, if you get a higher volume pump (Melling 10550) how do you get higher perssure?

I want to get this right - Mike says go high pressure, but people are going with high volume.

I want to go high pressure but don't trust the Melling 55a and the weaker casing.

Anyone got a suggestion for a better pump without going billet etc?

Thanks,

Mark
 

autoaddictions

Active member
Re: GM High Performance article - Turbo V6

Quickstop [UK] said:
I was looking for info on an oil pump and found this:

http://www.gmhightechperformance.co...k_turbo_v6_engine_build_bottom_end/index.html

Is the guy he mentions in there "Merk" from this site?

Can you explain the boost plate?

Also, if you get a higher volume pump (Melling 10550) how do you get higher perssure?

I want to get this right - Mike says go high pressure, but people are going with high volume.

I want to go high pressure but don't trust the Melling 55a and the weaker casing.

Anyone got a suggestion for a better pump without going billet etc?

Thanks,

Mark
moroso makes one also!!
 

SYO237

SyTy Registry
Re: GM High Performance article - Turbo V6

merk from this site is actually "brian MERKlinger", everyone just calls him merk for short.
 

Don W.

Stab it and steer it
Re: GM High Performance article - Turbo V6

At some risk...

I believe pressure and volume are directly related here. You have, in effect, only so many places to put oil in an engine. In other words a given vis oil at a given temp can only flow through an engine at a given rate DEPENDING on pressure. Up the pressure and you up the flow, all else being equal. This may not be technically correct but IMHO close enough for our use. Personally I wouldn't run much over 60 psi. It does take some horsepower to turn that pump.

Someone can correct me if I'm wrong.
 
Top