Harmonic Balancer, Pulley, belt alignment

Typhoon2121

TYPHOON2121
I'm working on the Ty known as "gumby" as its known for a customer, I installed a Frontier sfi balancer 6" and a new billet pulley to replace the old one. The crank pulley sets a little too far back and doesn't line up with the other pulleys. It has a long waperpump and stock PS/Alt bracket. Has anyone ran into this issue and what did you to to solve the alignment issue? I've ordered some crank pulley shims to try out and see if that will fix my issue.

Thanks
 
Last edited:

Z SKI

Donating Member
Re: Harmonic Balancer, Pulley, belt alignment

Bob,

You mean a pioneer balancer?? Do you have a stock crank pulley lying around to compare the billet one to??

See ya,
 

Typhoon2121

TYPHOON2121
Re: Harmonic Balancer, Pulley, belt alignment

Bob,

You mean a pioneer balancer?? Do you have a stock crank pulley lying around to compare the billet one to??

See ya,


Its a Pioneer Balancer and no it had an aluminum pulley with a crank trigger welded on to it, and the customer sold it with the stand a lone he had.

The new pulley i bought is for a long nose water pump.But is sits back a little to far behind the wp,alt, ps pulleys and walks off the belt.
 
Top