Letting my typhoon clone go

bender

Member
My family has had some changes recently and I am going to let my truck go. I know its not worth what I hoped, but am going to let it go anyhow. If anyone has any questions, just let me know.

***Just to clarify as a few have asked, this is full syclone driveline pulled from a wrecked sy. I cant remember now which number it was, but this truck is all wheel drive.***

This is not the average craigslist "typhoon clone" Myself and the PO put a lot of work into making it what it is. The body is from a 1987 Blazer, most everything else came from a syclone or typhoon. There are only a few items not accurate. No rust anywhere. Recent exhaust as well.

The engine is a syclone block, rebuilt less than 5k ago. Paint is good, a few blemishes. Cladding is all good. Interior is really good shape.

Few things wrong are striker bolt on drivers side has cracking around it, but the door functions properly, still seals tight and locks, it just moves a bit. Bottom of console cup had a hole drilled in it so I put an inverter in it so I could plug laptop in while logging. Headliner is sagging. Back window was replaced with frameless and is not tinted.

Only thing that is in the pics that is different is the overhead console temp and compass are in and functional,

I can take pics of anything anyone wants to see, and answer any questions anyone might have.

Included with the truck will be everything I have for it as I wont need any of it anymore.

I just finished up replacing the turbo with a stock one from a low mile truck. It has zero up and down or in and out play. I had a new upper downpipe welded up that is jsm style and cut out the turbo to match. I had an extra bung welded in so 2 o2 sensors can be used.I also have a stock un modified exh housing I will include, as well as the stock upper downpipe.

I am just going to let everything I have go with the truck, so it will come with the cold air intake I built using silicone parts, the kenne bell afpr, a 2 and 3 bar map, a moates g3 selector with multiple chips, and the led selector, a plx wideband with gauge, relocated coolant tank. I installed a devils own non progressive alky kit that activates at 6psi and is plumbed into the washer fluid tank, with a low level switch installed into it. I also have a 98+ rear disc parts pile that will go with it. A stock crossover tube in really good shape. A usb aldl cable for datamaster or tunerpro, triple gauge pillar pod and stock pillar pod, currently has autometer oil, water and boost installed.

I replaced all the intercooler hardlines with 3/4 heater hoses, and a sureflo pump. It has a fairly new optima redtp with battery disconnect switch. The stereo will stay, it has a pioneer bluetooth deck that is really kick ass, an infinity basslink 10" self powered sub, infinity component plates in the dash and infinity 6.5's in the rear powered by a kenwood amp. I have the typhoon visors but they are not installed. I have a few other parts that escape me right now.

Anything anyone wants to know I would be happy to tell you.

I am going to let it go for 5500.

SNC00219.jpg

SNC00221.jpg

utf-8BSU1HMDAyOTUtMjAxMDEwMDMtMTY0OS5qcGc.jpg

utf-8BSU1HMDAyOTYtMjAxMDEwMDMtMTY1MC5qcGc.jpg

SNC00225.jpg

SNC00226.jpg

SNC00227.jpg

SNC00201.jpg

SNC00202.jpg

SNC00203.jpg

SNC00204.jpg

SNC00205.jpg

SNC00206.jpg

SNC00207.jpg

SNC00208.jpg

SNC00209.jpg

SNC00210.jpg

SNC00211.jpg

SNC00212.jpg

SNC00214.jpg

SNC00215.jpg

SNC00216.jpg

0722111654-1.jpg

174914_216512461731652_100001186994358_544435_3866694_o.jpg

285956_216512625064969_100001186994358_544437_5449734_o.jpg

286926_216512531731645_100001186994358_544436_4282705_o.jpg

DSC_0690.jpg

DSC_0694.jpg


here is a link to lots of other random pics

http://s688.photobucket.com/albums/vv249/ssriderledlights/Typhoon/
 

Norm

Donating Member
Re: Letting my typhoon clone go

clean looking vehicle. That should be a quick sale.
 

BoostedSUV

Active member
Re: Letting my typhoon clone go

Always loved this clone. When it was for sale by the previous owner I was eyeing it up but it was just too far away. Good luck with the sale and sorry you have to let it go.
 

syclownz

New member
Re: Letting my typhoon clone go

Ttt for a beautiful truck. If I didn't know any better I would of thought it was an original.

I was curious if the gauges were stock with l.e.d. lights behind it?
 

TNPhoon

1of28
Re: Letting my typhoon clone go

X2 on the gauges if you would be willing to share how you did those.

And keep asking myself if I *really* need another truck..........
 

bender

Member
Re: Letting my typhoon clone go

The gauges are stock with 4 chip superflux led's from oznium .com replaceing the stock bulbs. I will get a link when I get home.
 

QuinnSY

Donating Member
Re: Letting my typhoon clone go

Hey, I got money in hand and can fly out there with a couple days notice. I am seriously interested, and would like to pick it up Sunday if possible. Let me know soon so I can book a flight. My Syclone needs a friend by her side in the garage. Let me know, thanks
-Matt
 
Top