N00b need help with Romulator, please.....(Long)

J

just a 6

R.I.P MyClone
Ok here we go
icon_smile.gif
All new to Romulator and tuning but very willing to learn.
icon_smile.gif
icon_smile.gif
Ok.gif


Let me first start with some questions i have about the Romulator. I have a bunch of different ECM Definition files which ones do i use with Ultimate v9 BIN's and which ones for Phillip Long BIN? I have these:

3bar_58...............=
dig.......................=
dig_58.................=
Ecm_42...............= Not for Sy/Ty, i know.
Ecm_58...............=
Mark....................=
Mark2..................=

Next Q is about "switch table", why don't we have a 3-bar MAP option there? If we don't need it, why?

Next is about ECM Constants, do i need to change the Injector Flow Rate? If not, why don't i have to change that?

-------------------------------------------------------------------------------------

Now over to some tuning issue i have (P.Long file), below you can see some of my DM files and also a complete list of my mods (Mod-list).

With P.Long BIN i can't go 20psi boost, the WB goes down to 10-rich if i do but at 15psi it's all good except on hwy driving.

http://www.gottraction.net/DataMaster/

In the txt file with the same name as the DM file you can read about the setup when i logged it.

I will add on more DM files as soon as i get my authorizing code for my DM, switcht laptop and my free logs are gone.

So this thread will be ongoing for a while i hope
icon_wink.gif


Thanks in advance for any help,
 
Turbo6

Turbo6

10.20@131.8
Re: N00b need help with Romulator, please.....(Long)

use the dig def file for 3 bar

just a 6 said:
Ok here we go
icon_smile.gif
All new to Romulator and tuning but very willing to learn.
icon_smile.gif
icon_smile.gif
Ok.gif


Let me first start with some questions i have about the Romulator. I have a bunch of different ECM Definition files which ones do i use with Ultimate v9 BIN's and which ones for Phillip Long BIN? I have these:

3bar_58...............=
dig.......................=
dig_58.................=
Ecm_42...............= Not for Sy/Ty, i know.
Ecm_58...............=
Mark....................=
Mark2..................=

Next Q is about "switch table", why don't we have a 3-bar MAP option there? If we don't need it, why?

Next is about ECM Constants, do i need to change the Injector Flow Rate? If not, why don't i have to change that?

-------------------------------------------------------------------------------------

Now over to some tuning issue i have (P.Long file), below you can see some of my DM files and also a complete list of my mods (Mod-list).

With P.Long BIN i can't go 20psi boost, the WB goes down to 10-rich if i do but at 15psi it's all good except on hwy driving.

http://www.gottraction.net/DataMaster/

In the txt file with the same name as the DM file you can read about the setup when i logged it.

I will add on more DM files as soon as i get my authorizing code for my DM, switcht laptop and my free logs are gone.

So this thread will be ongoing for a while i hope
icon_wink.gif


Thanks in advance for any help,
Click to expand...
 
J

just a 6

R.I.P MyClone
Re: N00b need help with Romulator, please.....(Long)

I forgot to say that the logs with ultimate chip was with the Ultimate Eprom in a moates G3 adapter inside the Romulator.
 
J

just a 6

R.I.P MyClone
Re: N00b need help with Romulator, please.....(Long)

Sorry Phillip if this sounds like a dumb Q, but the Dig 3bar is that the Dig or the Dig_58?
 
Turbo6

Turbo6

10.20@131.8
Re: N00b need help with Romulator, please.....(Long)

just a 6 said:
Sorry Phillip if this sounds like a dumb Q, but the Dig 3bar is that the Dig or the Dig_58?
Click to expand...

just the dig should work fine. you should not have to change injector size in the bin

the 3 bar calibration is built into the def file
 
J

just a 6

R.I.P MyClone
Re: N00b need help with Romulator, please.....(Long)

Turbo6 said:
just the dig should work fine. you should not have to change injector size in the bin

the 3 bar calibration is built into the def file
Click to expand...

Thanks Phil ;)
 
9

93ty475

Donating Member
Re: N00b need help with Romulator, please.....(Long)

just a 6 said:
Ok here we go
icon_smile.gif
All new to Romulator and tuning but very willing to learn.
icon_smile.gif
icon_smile.gif
Ok.gif


Let me first start with some questions i have about the Romulator. I have a bunch of different ECM Definition files which ones do i use with Ultimate v9 BIN's and which ones for Phillip Long BIN? I have these:

3bar_58...............=
dig.......................=
dig_58.................=
Ecm_42...............= Not for Sy/Ty, i know.
Ecm_58...............=
Mark....................=
Mark2..................=

Next Q is about "switch table", why don't we have a 3-bar MAP option there? If we don't need it, why?

Next is about ECM Constants, do i need to change the Injector Flow Rate? If not, why don't i have to change that?

-------------------------------------------------------------------------------------

Now over to some tuning issue i have (P.Long file), below you can see some of my DM files and also a complete list of my mods (Mod-list).

With P.Long BIN i can't go 20psi boost, the WB goes down to 10-rich if i do but at 15psi it's all good except on hwy driving.

http://www.gottraction.net/DataMaster/

In the txt file with the same name as the DM file you can read about the setup when i logged it.

I will add on more DM files as soon as i get my authorizing code for my DM, switcht laptop and my free logs are gone.

So this thread will be ongoing for a while i hope
icon_wink.gif


Thanks in advance for any help,
Click to expand...


I'll try to help since you didn't help me when I needed it....

Injector flow rate only calculates mpg I believe...it's in the p4 doc...
"Base pulse constant vs. desired egr" is what you need to manipulate for different sized injectors...plenty of info. on this site....there's even a calculator that a guy wrote to help you calculate a starting "base pulse constant" for oversised injectors...

Look into the F31M table as well....That one is directly related to fueling vs. your MAT's....very useful for me down here as my tune changes from day to night...when it gets hot, my truck gets richer vice versa.....

As far as the Dig and Mark files....I think they're password protected....Mark sent them to me once...If you get stuck, you can email him and he can guide you....his name here is "buster"


the 3-bar option was physical change in the source code that was done by Dig and or BG from here....
 
J

just a 6

R.I.P MyClone
Re: N00b need help with Romulator, please.....(Long)

93ty475 said:
I'll try to help since you didn't help me when I needed it....
Click to expand...

Excuse me, i might be senile but wtf are you talking about? I can't remember that i ever refused to help anybody, you better remind me boy.
 
9

93ty475

Donating Member
Re: N00b need help with Romulator, please.....(Long)

just a 6 said:
Excuse me, i might be senile but wtf are you talking about? I can't remember that i ever refused to help anybody, you better remind me boy.
Click to expand...
:roll:
 
J

just a 6

R.I.P MyClone
Re: N00b need help with Romulator, please.....(Long)

Nevermind the tuning issue, i blow up the tranny today :( Half throttle passing a truck and then a big bang and no drive in any gear. Trans making a loud wining sound even in park. I will pull the tranny later this fall and see what happen.

It's been shifting great for about 4-5 months.

Thanks to Phil and Servando for helping :tup:
 
You must log in or register to reply here.
Top