Need interior screws

akwilks

akwilks

Mr. Keith
I need as many interior screws as I can get for the dash and interior panels in my Ty. I didnt notice what was missing until well after I bought my truck and desperately need them. If anyone has some they wish to part with or can tell me where to get them I would greatly appreciate it...

Thanks,
 
dgoodhue

dgoodhue

BuSTeD 4.3
Re: Need interior screws

akwilks said:
Only if I can get a steering box, pitman arm, idler arm, steering shaft and alternator installed by then. Its not likely though...
Click to expand...

The Alternator is easy. To do the Pitman Arm/Idler Arms/steering shaft pull the lower CCHE (IC) and go from that angle, remove the steering box to do the pitman and install the steering shaft.
 
TYHOGG

TYHOGG

Active member
Re: Need interior screws

akwilks said:
I need as many interior screws as I can get for the dash and interior panels in my Ty. I didnt notice what was missing until well after I bought my truck and desperately need them. If anyone has some they wish to part with or can tell me where to get them I would greatly appreciate it...

Thanks,
Click to expand...

Let me know which one, and size. I will buy them for you at my cost + Shipping.

http://www.auveco.com/product/tapping.html

-Adam
 
TYHOGG

TYHOGG

Active member
Re: Need interior screws

they do not offer a "grab bag", but i can order multiple boxes and divide them up for everyone. Most of the screws will come in a box of 10 or so. I'll check for everyone today.

-Adam
 
J-bird

J-bird

Member
Re: Need interior screws

I wold be in if you wanted to do a GB on a complete interior set! All of mine are nasty!
 
TYHOGG

TYHOGG

Active member
Re: Need interior screws

Alright I'll get the bolt gauge out tonight and start going through the interior screws. I'll come up with a few packages for the screws including a full interior package. I should have some prices posted early next week.

Adam
 
akwilks

akwilks

Mr. Keith
Re: Need interior screws

GreenTyGuy said:
Alright I'll get the bolt gauge out tonight and start going through the interior screws. I'll come up with a few packages for the screws including a full interior package. I should have some prices posted early next week.

Adam
Click to expand...


You're the Man!!
 
TYHOGG

TYHOGG

Active member
Re: Need interior screws

Alright guys i have been measuring screws this afternoon. Please let me know if there are some i left out. So far i have measured for the following parts:

Door Handle
Door Trim (by window)
Door Sill
Kick panels
Underdash mouldings
Cup holder
A-pillars
Tailgate

Please let me know if there anymore you would like.

Thanks,
Adam
 
F

FirstGenZq8

:eek:
Re: Need interior screws

the screws for the headlight switch panel and the AC control panel? or are they the same as some of the other screws you've measured for? umm, what else - maybe the glove box door screws?
 
TYHOGG

TYHOGG

Active member
Re: Need interior screws

Emailed auveco for some pricing on screws I didn't have pricing on. Following up with th today.
 
TYHOGG

TYHOGG

Active member
Re: Need interior screws

Ordered the screws today. I will be back in town on the 27th. I guess just let me know what u need and I'll ship them out. They will be marked in zip lock bags so u know where they go. I'll pm u the pricing once I know what u need. Not sure any other way to do it, there are a lot of screws.
 
You must log in or register to reply here.
Top