Rear Alignment Blocks

[THEKID]

I Seen A Post On Here A While Back About Someone Was Making Blocks Setup To Lower And Slide The Rear End Forward Any Help With Info Would Be Greattly Appreciated

 

[TT350]

Re: Rear Alignment Blocks

Board member Bigtime has those. http://www.bigtimeauto.com/ hope this helps.

 

[bigtime]

Re: Rear Alignment Blocks

Thanks TT350.

I haven't made any lately as I have not had time. If you are interested shoot me a email.

 

[THEKID]

Re: Rear Alignment Blocks

Bob I Would Like To Get A Set Of Blocks From You. Let Me Know How To Get In Touch With You So I Can Get Them Ordered

 

[V]

Re: Rear Alignment Blocks

I Seen A Post On Here A While Back About Someone Was Making Blocks Setup To Lower And Slide The Rear End Forward Any Help With Info Would Be Greattly Appreciated

I'm guessing that you want to reposition the axle towards the BACK of the truck to center the rear wheel in the wheelwell?

http://www.jagsthatrun.com/Pages/Parts_S10-301.html

BTW, how do you type that way? :lol: :tup:

 

[bigtime]

Re: Rear Alignment Blocks

Home of the 2.5 lowering block that centers the rear.

bigtimeauto@verizon.net

 

[THEKID]

Re: Rear Alignment Blocks

Bob My E- Mail Is Not Working Correctly Give Me A Call When You Get This So I Can Pay You To Start On Those Blocks And Let You Know Where To Ship Them Too. 314 565 5312 Thanks Again
Gary Zarbo

 

[DOMN8R]

Re: Rear Alignment Blocks

Bob,

I'd be interested in a 1" raising block that centers the rear. If that sort of thing is possible, please drop me a line.

Thanks,
Danny

 

[jwaller]

Re: Rear Alignment Blocks

Bob,

I'd be interested in a 1" raising block that centers the rear. If that sort of thing is possible, please drop me a line.

Thanks,
Danny

blocks cannot be used to raise the rear on our trucks as the axle is mounted on the bottom of the spring. you could flip the axel to the top but it's ganna give you more than an inch of lift.

I did this on my blazer I use for towing and it worked great. stick in an add-a-leaf to get the lift you want and more spring rate and then use the block(from bob to center and then lower the rear back to your +1 from stock) to set ride height.