shut down

mikester929

New member
i started my truck for the first time in like a month after putting the truck together was cool 1 night and the next day started it up was fine then after running for a little while like 45 min shut off and didnt wanna start back up. like i said i jus put the truck together nun was done to the motor at all.
 

SY2932

Administrator
Re: shut down

If you aren't hearing the fuel pump come on when you turn the key to the "ON" position, your ECMB fuse is probably blown. Usually that means it's time for a new fuel pump.
 

mikester929

New member
Re: shut down

i think its no spark guys changed the plugs, wires,cap, rotor, coil and still no spark


could it be grounds i did put the batt in the trunk but te truck is cranking. what do u guy think.
 

SY2932

Administrator
Re: shut down

could it be grounds i did put the batt in the trunk

That is probably your problem. Been in the syty game for over ten years and have lost count of how many trucks have had issues after a battery relocate that was done incorrectly... Check out this post here.
 

mikester929

New member
Re: shut down

That is probably your problem. Been in the syty game for over ten years and have lost count of how many trucks have had issues after a battery relocate that was done incorrectly... Check out this post here.

the truck started and was running why would it be grounds now just askin. does grounds have to do with the truck not getting spark
 

alwayscode390

pppssssshhhhhtttttttttttt
Re: shut down

You need the following three conditions to exist within the cylinder for it to run:

  • Compression sufficient for combustion. Included is air delivery and exhaust evacuation at the correct time.
  • Fuel in the proper amount. Not too much, or too little.
  • Spark of sufficient intensity, at the correct time.
You're missing one or more of the above elements. That's why it doesn't start. Let the diagnostics begin.

great post for a lot of guys ---
 
Top