Spring mods

[Stangbeater]

I busted the Sy out the other day. I am installing a remote filter and cooler for the tranny. Where does the tranny out line go into the radiator? The line on top of the radiator on the passengers side is the tranny return line correct? Which is the one to hook the cooler to?

Thank you in advance,
Dameon Barnhart
Sy 1664

 

[RAACCR]

Yes...the top line from the radiator mounted cooler is the return line...that's the one you want to tap into.

Rob

 

[Stangbeater]

Yes, this is the line for the tranny cooler, but is it the same line for the romote filter? Do you just hook one in after the other?

ie: steel tranny line to filter in, filter out to cooler in, cooler out to raidiator.

Dameon Barnhart
Sy 1664

 

[RAACCR]

You could make a good arguement either way about placing the filter before or after the cooler(s). But, anywhere in the loop should be fine. I'd place the filter where it's most accessible, and then plumb it into the loop wherever is easiest based on where you've located the filter.