Syclone Alarm ID needed

ackwdw123

New member
Hi Everyone, I'm finally getting around to dissecting my Syclone and the alarm in my truck needs to go. This thing keeps blinking the hazards and beeping in the truck while I'm driving down the road. If anyone is able to identify any of these parts please let me know what they are. I need to reverse the installation and put this out. Thanks in advance -ack

alarm-id-01.jpg

alarm-id-02.jpg

alarm-id-03.jpg

alarm-id-04.jpg

alarm-id-05.jpg
 

RealFastV6

@jb_and_his_coffee
Re: Syclone Alarm ID needed

Nothing alarm related in the last two pics that I see.

Second to last looks like you got the purple wire mod done.
Last one inflates the side of your seat.

Edit: Ehhhhhh what's that orange wire in second to last?
 

ackwdw123

New member
Re: Syclone Alarm ID needed

Hi, Thanks for the info and question. I'm still learning the truck, I believe the orange wire connects to the red wire near the plug wire for the hood light. I disconnected it.
 

tunerpike

Donating Member
Re: Syclone Alarm ID needed

First pic is an Ultimate Chip, you should have a key that goes with it to go between tunes...

I believe your third pic would be alarm related.
 

BoostedSUV

Active member
Re: Syclone Alarm ID needed

First pic is an ultimate chip as mentioned, third pic looks like it could be a torque converter lock up switch, the last pic is the lumbar support pump.
 

ackwdw123

New member
Re: Syclone Alarm ID needed

Thanks everyone! Gives me a great start, plus I learned about the purple wire issue/fix.
 

ackwdw123

New member
Re: Syclone Alarm ID needed

Hi Everyone, For anyone interested, the 2nd picture is some type of button that I traced back to a Crime Guard 328i3 security module. I know that the hazard lights continue blinking for about 30 seconds after I start up the car. I'm hoping this is some type of control to shut the blinkers off after I start the ignition. It's not a pretty scene trying to drive a cool truck with the hazards blinking.

If anyone has the information on how to get the Brake release free from the dash please let me know, I couldn't get the holding clips free and had to be careful not to break the plastic holding this clips on while I was tracing the wires to the button above. Cheers.

Best,
-ack
 
Top