Tool in a Ford full size

SY2932

Administrator
I have encounters with these guys ALL the time and most are just a waste of gas with the exact same outcome. However, last night was more memorable.

After going to a local cruise in and stopping at the parts store, I am on my way home when I pull up alongside a black crew cab full sized Ford pick up occupied X3 at a light. There is a chick riding shotgun and says to me "Get a real truck honey". I think to myself WTF? I don't even know this girl and she called me "honey"??? Anywho, I gave her a semidirty look and rolled my window up. There is traffic in front of us so we couldn't do anything anyways.

Wouldn't you know it at the next light that we rolled up to the car in front of the Ford got in the left turn lane and the car in front of me turned right on the red. My transmission temperature gauge was reading a little cool since it was in the 70's last night. So, I decided to heat it up some with some brake engine torquing. The Ford responded by blipping the throttle and inching forward deep staging I guess... Syty school was about to be in session. Of course, I killed him BIG TIME out of the hole.

I got in the right lane to turn and he dropped in behind me. After we both turned, he shot back over into the left lane in an attempt to do a ricer flyby. I rolled my window down some so that as soon as he was next to me, I could nail it and wave "buh bye" to him as I walked away. Which I happily did
icon_lol.gif
.

Now is where he decided to be a tool. Most of the time other wanna be contenders either turn off or drop way back and don't try to pass me afterwards. Guess he figured since he couldn't out accelerate me from a dig or roll, he would just drop behind me and tailgate 3-4 feet off my bumper and turn his highbeams on
icon_rolleyes.gif
. To which I slowed down to about 5 miles under the speed limit (35 MPH) which forced him to pass me. What a BABY. Probably kids out driving daddy's truck...
 
Last edited:

SY756

New member
Re: Tool in a Ford full size

Gotta love it.

On a side note, I can't stand it when they act like babies and tailgate. When I'm in the DD and they are tailgating, I'll play the "brake check" game. It's always fun. :)
 

CLONE

New member
Re: Tool in a Ford full size

One advantage of a solid bed cover and sliding rear window is I can always throw one of the bags of drywall nails I keep in the glovebox out of the slider to deal with these types of situations.
 

91blazins10

Active member
Re: Tool in a Ford full size

CLONE said:
One advantage of a solid bed cover and sliding rear window is I can always throw one of the bags of drywall nails I keep in the glovebox out of the slider to deal with these types of situations.


:rotf:
 

MySaudi

New member
Re: Tool in a Ford full size

now thats some good stuff down there slidding window and nails HAha Almost makes me feel bad for the guy..................... Nott :rotf:
 

SY2932

Administrator
Re: Tool in a Ford full size

CLONE said:
One advantage of a solid bed cover and sliding rear window is I can always throw one of the bags of drywall nails I keep in the glovebox out of the slider to deal with these types of situations.

Cool, now I know where your secret hiding spot is the next time I need some and can't find any in your garage.
 

pinellas50

New Guy
Re: Tool in a Ford full size

CLONE said:
One advantage of a solid bed cover and sliding rear window is I can always throw one of the bags of drywall nails I keep in the glovebox out of the slider to deal with these types of situations.
Back in the day, my weapon of choice was a handfull of BB's.
 

Daron

Active member
Re: Tool in a Ford full size

pinellas50 said:
Back in the day, my weapon of choice was a handfull of BB's.

Pachinko Balls are the best.

Pachinko.jpg
 
Last edited:
Re: Tool in a Ford full size

I would have been insanely pissed. Not only do they insult you they tailgate you after they lose. What if he would have rear ended you. That big ass truck would smash the hell out of the sy. I think I would have just flooered it to get away from him, and maybe the finger out the window to go with it.
 

Black Knight

I Glow Therefore I am
Re: Tool in a Ford full size

SY756 said:
Gotta love it.

On a side note, I can't stand it when they act like babies and tailgate. When I'm in the DD and they are tailgating, I'll play the "brake check" game. It's always fun. :)

Try the "E-brake check" game, they never see that one coming :)
 

Driven_out

Sonoma Driver
Re: Tool in a Ford full size

i always brakecheck tailgaters, its fun, if they insist, i slow down to like 10 miles below speed limit, and not let them pass
 

SY2932

Administrator
Re: Tool in a Ford full size

Driven_out said:
i always brakecheck tailgaters, its fun, if they insist, i slow down to like 10 miles below speed limit, and not let them pass

I'm not a big fan of brake checking folks especially when it's in my syclone
squint.gif
. Usually, I just hammer down to get them off my butt. Unfortunately where I was at that wasn't an option since I had traffic in front of me.

Funny thing is I was talking to my best friend last week about wiring him up with a button that would make the brake light come on without actually hitting the brake. That would eliminate the possibilty of a tailgater rear ending you and you would get the same effect. Them slamming on the brakes to keep from hitting you even though you aren't stopping. I could have had BIG fun with that one last night, guess I need to do that for myself now
icon_lol.gif
!

Actually the BEST item that I have found to keep tailgaters at bay is a high powered rifle in plain sight in a rack in the back window which is 100% legal where I live. Folks get on your butt and then drop WAY back for some reason. I did get approached by two cops in two cop cars once for having my 30 round magazine in my Ruger Mini-14. I removed it as a favor to them since they "didn't like it". That won't fit in my truck with the flash hider on the barrel but my 12 gauge SPAS with a folding stock prolly would. I'm pretty sure that rack won't fit in my syclone, I could always make one I guess...
 
Re: Tool in a Ford full size

SY2932 said:
I'm not a big fan of brake checking folks especially when it's in my syclone
squint.gif
. Usually, I just hammer down to get them off my butt. Unfortunately where I was at that wasn't an option since I had traffic in front of me.

Funny thing is I was talking to my best friend last week about wiring him up with a button that would make the brake light come on without actually hitting the brake. That would eliminate the possibilty of a tailgater rear ending you and you would get the same effect. Them slamming on the brakes to keep from hitting you even though you aren't stopping. I could have had BIG fun with that one last night, guess I need to do that for myself now
icon_lol.gif
!

Actually the BEST item that I have found to keep tailgaters at bay is a high powered rifle in plain sight in a rack in the back window which is 100% legal where I live. Folks get on your butt and then drop WAY back for some reason. I did get approached by two cops in two cop cars once for having my 30 round magazine in my Ruger Mini-14. I removed it as a favor to them since they "didn't like it". That won't fit in my truck with the flash hider on the barrel but my 12 gauge SPAS with a folding stock prolly would. I'm pretty sure that rack won't fit in my syclone, I could always make one I guess...

Sweet! A Syclone with a gun rack! Myclone would've loved that lmao
rotf.gif
 

TY0618

Member
Re: Tool in a Ford full size

SY2932 said:
I'm not a big fan of brake checking folks especially when it's in my syclone
squint.gif
. Usually, I just hammer down to get them off my butt. Unfortunately where I was at that wasn't an option since I had traffic in front of me.

Funny thing is I was talking to my best friend last week about wiring him up with a button that would make the brake light come on without actually hitting the brake. That would eliminate the possibilty of a tailgater rear ending you and you would get the same effect. Them slamming on the brakes to keep from hitting you even though you aren't stopping. I could have had BIG fun with that one last night, guess I need to do that for myself now
icon_lol.gif
!

Actually the BEST item that I have found to keep tailgaters at bay is a high powered rifle in plain sight in a rack in the back window which is 100% legal where I live. Folks get on your butt and then drop WAY back for some reason. I did get approached by two cops in two cop cars once for having my 30 round magazine in my Ruger Mini-14. I removed it as a favor to them since they "didn't like it". That won't fit in my truck with the flash hider on the barrel but my 12 gauge SPAS with a folding stock prolly would. I'm pretty sure that rack won't fit in my syclone, I could always make one I guess...


Road and Track showed a nice one in the 1991 mag. feturing the Sy against the ferrarri!
People up here in the great white north sedomly kn
 

jbone

Member
Re: Tool in a Ford full size

I would love to see a spas 12 in the back of any window.

In my pickup (GMC 2500) I have a brake controller for towing. I can hit a little switch on it which turns on the brake lights but doesnt slow the truck down. Sometimes ill hit the switch and nail the gas at the same time. People get very confused :rotf:

In the ty, most cars cant keep up so I just nail it if someone is tailgating
 

the baPhoon

Active member
Re: Tool in a Ford full size

Rig up some HID 5000ks as your backup lights and rig THAT to a switch and blind the feckers... wait that may be slightly hazardous.. heh
 

jslezak83

Soon-to-be BoostedBlazer
Re: Tool in a Ford full size

i miss my dads 83 buick park ave. it had leds above the rear window for the brakes and blinkers. all you had to do was tap the brakes enough to light those, and then watch the fun unfold.
 
Top