tools every SY/TY owner should have

Sportmachines

Active member
Re: tools every SY/TY owner should have

Good into Ken. Both tools make for a much happier syty owner. In addition, Autozone carries a single swivel 5/8 spark plug socket for under $10. We have several and make plug changes a breeze.
 

warmpancakes

New member
Re: tools every SY/TY owner should have


couple it with


http://buy1.snapon.com/catalog/item...group_ID=12884&store=snapon-store&dir=catalog


and make plug changes a breeze, also the above extension is great for the trans bolts, add a small magnet to the inside of the socket to make re-install of the bolts simple. On the subject of trans swaps get a

http://buy1.snapon.com/catalog/item...4&group_ID=238&store=snapon-store&dir=catalog

or a

http://buy1.snapon.com/catalog/item...0&group_ID=238&store=snapon-store&dir=catalog

the longer extensions are great for the oil adapter on the block to remove the lines
 

sy538

New member
Re: tools every SY/TY owner should have

If you still have w2a, this is a must.

https://www.napaonline.com/Catalog/CatalogItemDetail.aspx?A=SER774000_0120219865&An=0

Hook it up to the ic, pour in some coolant, turn on your pump and let it purge all the air while you do something else for 15 minutes.


812937.jpg

CatalogItemDetail.aspx
 

Throws

Active member
Re: tools every SY/TY owner should have

This thread is a good reason why I'm glad I don't have a truck account.

-P
 

QWERTYphoon

Motley Driver Award 2009
Re: tools every SY/TY owner should have

I am just waiting for this thread to turn into pictures of jackstands!
 

Aeroking

e.i.
Re: tools every SY/TY owner should have

zipties, duct tape, and ALDL cable.

I also always carry a couple fuses, and a welding glove, for checking spark plugs while the motor is hot.
 

Don W.

Stab it and steer it
Re: tools every SY/TY owner should have

Only thing I've seen so far that I like is the Rad funnel kit but even that is expensive. Cut the bottom off a plastic oil bottle. Works great. The Lisle spreader is a must. You can spread the manifold, heat it, spread it some more and make the manifolds so you don't need the spreader. At least I did.

Long extensions are a must have. But $80.00 Yikes.

Standard swivel plug socket works great.

I would add the Taylor plug wire remover as a must have.

A set of wobble sockets is also a must have.
 
Top