Turbo oil drain line

[sy]

I need to replace a leaking Turbo oil return line...so I picked up the Race proven motors braided line...real nice stuff....I am in the proccess of removeing the old one and need some help....How the hell are you suposed to get at this thing ,to remove it....anyone have a step by step....the only way I can see getting in there is removeing the battery and the turbo......I just don't want to take apart shiat i don't have too.....anyone have some directions to make this go smootly...please be specific...
Thanks
Frustrated

 

[Trizney]

If that is the line in the middle of the turbo on the bottom, the easiest way is to remove the passenger side wheel well. Gives you a lot more space to work with.

 

[sy]

that helps a ton...and does give better axess
thanks much

 

[Loeryder]

yeah its 2 tiny bolts up through the bottom of the flange.
with the wheel well out its like right there.

Just cut the rubber hose part since youve got a SS replacement, it'll save you the headaches of cutting those stock crimp clamps off. pita...

 

[0966Sy]

I cut the factory clamps off and replaced them with 3/4"hose clamps. That fixed my leaky oil return on the Typhoon. Now for the Syclone the braided RPM line is on the way. The hardest part is awaiting you :evilbat: Try this for help on that factory hose barb on the pan.

http://www.syty.net/phpBB2/viewtopic.php?t=32690

Goodluck

 

[sy]

Thanks a ton guys...Im sure this is going to be interesting...

 

[sy]

one more question...with this RPM Braided line do I re-use the Oring from the original TORL...at the connection to the block?......

 

[sy]

forget it ....stupid question.....got it off and got the new braied line on....