PA TurboTime Front Coilover Shocks *SOLD*

1

1BADV6

Donating Member
Pair of TurboTime Front QA-1 Single Adjustable Coilover Shocks with Dual Springs. These were purchased new from Erue, installed on truck for mock up but never driven. Includes cone shaped upper spring cups machined for 2 1/4" springs for additional shock tower clearance, metal eyelet bearings for durability and 3 pc Torrington bearings under springs for ease of height adjustment. Dual 2 1/4" ID 4" and 5" long springs provide progressive spring rate for smooth ride during normal driving and a stiffer spring rate during hard cornering. This set up gives a much lower than stock stance in front and can be used with stock A-Arms or RPM/JSM Tubular Coilovers. Original cost was $769, will sell for $550 plus shipping and Paypal fees. Comes with spanner wrench.
 

Attachments

  • 20160320_224040 (1).jpg
    20160320_224040 (1).jpg
    33.6 KB · Views: 2
Last edited:
518

518

Member
Re: TurboTime Front Coilover Shocks

Re: TurboTime Front Coilover Shocks

What modifications would i need to make to my stock suspension truck to make these work?
 
1

1BADV6

Donating Member
Re: TurboTime Front Coilover Shocks

Re: TurboTime Front Coilover Shocks

You need to remove the stock torsion bars and cut a few tabs/brackets off the frame near the shock for spring clearance. The upper a-arm will also need some grinding for spring clearance. There are a few write-ups under the suspension forum that explain how to convert stock a-arms to coil overs.
 
hatrik8

hatrik8

Donating Member
Re: TurboTime Front Coilover Shocks

Re: TurboTime Front Coilover Shocks

Will they work with sportmachines' a-arms?
 
atomicmecha

atomicmecha

I hate rust
Re: TurboTime Front Coilover Shocks

Re: TurboTime Front Coilover Shocks

oh, this is tempting as hell and I wouldn't have to deal with shipping since I could easily pick them up one weekend.
 
You must log in or register to reply here.
Top