VIN location on frame

NorwegianTy

New member
Where is the vin on the frame located? Cant find it... And really need to as the government gonna take my registration/title in a week if I cant.. :rant:

All other vin numbers match up, just cant fnd this. Please be specific on loc if you can.
 

Jimmy

Banned
Re: VIN location on frame

On top of frame at passenger rear tire.

Body has to be off to see it.
 

NorwegianTy

New member
Re: VIN location on frame

Arent allowed. If the number is stamped in the frame (after production) the DMV has to have it in record, when, how and by who and it has to be done at the DMV by a approved technician. (And if the number is new and you dont have the paper saying that they wont approved it)

Damn communists
 

NorwegianTy

New member
Re: VIN location on frame

On top of frame at passenger rear tire.

Body has to be off to see it.

Not possible at all? Not even with mirrors or anything? (Dont have access to the car until later today to check myself)

Is it excactly above the rear axle? Or more to the front/rear?
 

Jimmy

Banned
Re: VIN location on frame

Not possible at all? Not even with mirrors or anything? (Dont have access to the car until later today to check myself)

Is it excactly above the rear axle? Or more to the front/rear?

It is above the rear axle on passenger side.No way in **** it can be seen easily.


It is barely visible with the body off.

Have you ever seen the VIN on the back of a block?

It's some pixelated BS,not even a real stamp per se.

If I were you,I would get documentation on this fact.How? :dunno:


edit: Possible?Sure,anything is possible.

Here's all you gotta do:

A. Take body off.
B. Cut away part of body that obscures VIN stamp.

That's it,unfortunately.
 

NorwegianTy

New member
Re: VIN location on frame

Hehe, yep.... Well, I would actually have picked the body of and trailered my shit down to the dmv if I had the time, but I dont. First time since 1998 they ever had any problem with it. Hate this stuff...

BTW thanks for the help, its gonna save me alot of time to not have to search the hole frame (in a cold garage when it is below freezing)

Edit: Well maybe cuttin wheel here I come, it is ether this or return the registration, just got of the phone with the DMV for the oumph time this morning.
 

Jimmy

Banned
Re: VIN location on frame

Hehe, yep.... Well, I would actually have picked the body of and trailered my shit down to the dmv if I had the time, but I dont. First time since 1998 they ever had any problem with it. Hate this stuff...

BTW thanks for the help, its gonna save me alot of time to not have to search the hole frame (in a cold garage when it is below freezing)

Edit: Well maybe cuttin wheel here I come, it is ether this or return the registration, just got of the phone with the DMV for the oumph time this morning.

Tell them faggots that it's not your problem that they can't see it.


All they gotta do is lift the body off,That's thier job,amiright? Reading VINs?

Not your fault.Tell them where it is let them figure it out,I mean,they are inspectors.right?

That's where GM put every t-10/t-15 VIN on every frame ya know.But they prolly should already know that. :roll:
 
Last edited:

Houseofperformance

switchhappy!!!
Re: VIN location on frame

Edit: Well maybe cuttin wheel here I come, it is ether this or return the registration, just got of the phone with the DMV for the oumph time this morning.


are they smoking crack up there?

they force you to destroy your truck in order to see a vin wich is clear vissible behind the windshield?
get out the punch-type numbers and give them a number on a place they can see.
 

NorwegianTy

New member
Re: VIN location on frame

Nah, finally got to talk to some semi sane people at the dmv and atleast got some answers (not good ones but still).

Long story short:
The car was imported to Norway in 1998 and should at that time gotten the vin stamped in the frame (by the dmv) at a visible place. The location should be printed in the registration/title by the dmv to be valid. This was not done and nobody cared before now. They just checked the vin tag in the windshield.

Now they suddenly care and the car is "illegal" to drive in their point of view. This is because of tax reasons, the taxes at the time the car was imported was about 70 000+ USD, but you could rebuild a blazer/jimmy to typhoon specs and get it approved and not pay taxes and you could do a body/frame switch and get it approved without paying. But my car was done the "right" way and payed for, they are afraid somebody switch frames or something and want to have a number on it to prove this is the frame that the taxes was paid for.

One wrong vin number (body/frame/engine) and you are screwd if they find out and it not is in the title.

Finally got to speak with somebody sane down at the DMV. He admits that they should have stamped the number and notet where, but he couldnt find it in the papers from 1998, so probebly they "forgot". I have to reserve a time to go to the DMV to meet with a tech inspector to make sure that he dont think that any frame swapping has been done and then he can stamp it in the frame and makeout a new title with the number and localisation. Then I got to get another inspector to take regular tech inspection and say that he can read and confirm the frame vin is correct and matches every thing else. But this mean I got to take more time away from work and time beeing my work is 5 hours away so normally only home in weekends. This sucks.

Have membership in a large american car club wich has a fulltime lawyer so that is the next step at this time. Atleast trying to get money back because of lost work time and not to mention that all the inspections costs close to 80 bucks a pop, and are only needed beacuse the asswipes dont know their own rules.

Hope the car isnt gone to the crushers before this is over.
 

1BADV6

Donating Member
Re: VIN location on frame

Two of my Typhoons have the body off the frame, the frame for the 92 has the number stamped in two places on the passenger side upper frame rail. One is adjacent to the front leaf spring mount and the other is ajacent to the rearmost body mount outrigger. I don't recall seeing it there on my 93 frame. I will take a look this weekend and let you know. That frame was blasted and powder coated so it may not be as obvious.

thanks,
 

NorwegianTy

New member
Re: VIN location on frame

Thanks, checked both places with mirrors cant find anything yet, it is probebly to well hidden with the body still on the frame. Hating the bureaucracy in this country so much right now............
 

NorwegianTy

New member
Re: VIN location on frame

Its a 1992, so 93 info isnt necessery for my part, but if someone else ever do a search they probebly will
 

NorwegianTy

New member
Re: VIN location on frame

The last 4 vin digits are 1864 but I dont now what build number that is. Was under the impression they didnt follow the vin # at PAS. But I guess it is safe to assume that it is buildt somewhere late in the production year. Early fall maybe :)dunno:)
 

1BADV6

Donating Member
Re: VIN location on frame

Yea, I would assume that yours is a late production 92. I will look for the stamped numbers on my 93 frame and maybe that will help you. The numbers on my 92 are deep enough where you should be able to feel them with your fingers once the frame has been cleaned off in that area.
 

NorwegianTy

New member
Re: VIN location on frame

That would be great, I spent more than an hour under the truck before I left for work and didnt get anywhere. Wont be able to get to the truck until monday, but hopefully with a bit more luck
 

NorwegianTy

New member
Re: VIN location on frame

Got the car approved today, was at the DMV wednesday and after 4 inspectors used close to 2,5 hours with the car I got thumps up. A spot on the frame was grinded and numbers stamped into the frame, the inspectors that does the technical/safety inspections approved the car friday. Didnt have do pay for any of the hours spent, regular fees are about 100usd for each inspection so thats good, but had to pay for a new registration/title that contains information about the number on the frame:tdown:.

What scares me is that if I hadnt pulled some strings with a contact my father has at the DMV to get to jump the line it wouldnt have been possible for me to make the time limits they gave me... Hmpf:rant:

But atleast the car is now approved again and completly road legal:tup:
 
Top