WTB Edelbrock 2114 manifold

Beavis

Still plays with trucks
Re: WTB Edelbrock 2114 manifold

Opos, dyslexia kidekc ni

2114 for vortex
2111 for l35/lb4
 

hotrodsbyray

New member
Re: WTB Edelbrock 2114 manifold

I have 1996 heads and will be using my 1995 TBI.
So, I need the 2114 - I was just hoping to find a used one for less than the $256 total summit charges.
 

qbnkiller

Conflaguration Specialist
Re: WTB Edelbrock 2114 manifold

Sorry, but I use the 2111 - not VORTEC-friendly!

Good luck!
 

leadfoot

Member
Re: WTB Edelbrock 2114 manifold

What we should be doing is writing to Edelbrock to manufacture the 2114 manifold with injector bungs.

There is still a good market out there among the S10 4.3 owners whom are turning to forced induction. :2cents:
 

hotrodsbyray

New member
Re: WTB Edelbrock 2114 manifold

How does Mike modify the intake - and which intake does he modify. Is it to add injector bungs to the 2114?
How would you then add injectors and how to control them. Is there a thread about that?
Sorry if I ask dumb questions, but kinda new to this.
 
Re: WTB Edelbrock 2114 manifold

t/bone sold me his but summit has them but then you need to send it to drill and weld the bungs that about 200 . plus shipping that goint to cost you about 500.. complete.
 

jklein68

Donating Member
Re: WTB Edelbrock 2114 manifold

I suppose he could modify the 2111(L35?) or the 2114(Vortec). They add injector bungs to the intake, the stock computer can control the injectors. I am pretty sure there is thread out there that discusses this conversion.
 
Top