Yes i know..another low boost question....UPDATE!!!

QUICK STORM

B.A.M.F. BMW Tech
Re: Yes i know..another low boost question....UPDATE!!!

have you tried to contact campbell automotive? remove the rod off of the wastegate linkage on the exhaust housing and move the flapper around, see if it has any play in it. also check the play of the trubo wheel, if there is any up/down play, you need a rebuild of the turbo.
 

SY2767

Member
Re: Yes i know..another low boost question....UPDATE!!!

QUICK STORM said:
have you tried to contact campbell automotive? remove the rod off of the wastegate linkage on the exhaust housing and move the flapper around, see if it has any play in it. also check the play of the trubo wheel, if there is any up/down play, you need a rebuild of the turbo.

I have not contacted Campbell because i am sure they won't (or can't) do problem solving over the phone...i am 12 hours away from them. If i lived in Edmonton i would bring it to them to tune-fix, in my province there is no one that i know of that could tune or diagnosis my truck so i am screwed. I know a very good GM tech and he checked my fuel pressure today and it was low so he adjusted it, he then checked my waste gate diaphragm with a vacuum pump and it was fine (holds pressure) but he said the rod seems to be seized as it would not move whatsoever so i guess that's a starting point...
 

SY2767

Member
Re: Yes i know..another low boost question....UPDATE!!!

Well....i removed my wastegate diaphram and confirmed 2 things. The first....the "very good" gm tech i know that looked at my truck and tested my wastegate diaphram used a pump that sucks air, not realizing that it operates the opposite way. I guess this is why he said it holds pressure and it seems as though the shaft in my manifold was seized. The second thing was that it moves in the opposite direction that i thought it did and that nothing is seized..... :roll:
 
Top