Recent content by talbotdd

My Typhoons transmission is acting kinda funny and I was hoping you all could point me in the right direction. It will shift to overdrive at around 47mph but it feels like the converter is always locked up. Once it hits high gear it falls on its face (falls to about 1400rpms). I even have to...

OK guys, I was working on my truck over the winter (big surprise) and leaned on an AC hose and broke it. Anyway, from what I hear the AC setup is unique to syty only so I need someone to come through with this part so I can get my AC working again. It is in the 90s this week and black truck with...

Re: Post a pic of your truck taken today Thanks for the compliments guys, I really appreciate it. You are all correct, they are the deep dish Hamann HM2 wheels all around. I am running spacers on the rear and they sit just inside the edge of the cladding. They are 19s with 235/35/19 all...

Re: Post a pic of your truck taken today Not really from today, but here are some from our trip on the Power Tour on Thursday and Friday (from Dayton to Somerset to Bristol). If you have the opportunity to go next year DO IT. It was a great time and I met some great people. The TY really got...

Re: Mystery wire - need some help LOL - Guess its for the hood light. Thanks for the help everyone! -Dustin

OK guys there is a wire running along the firewall that apparently goes nowhere. It has a male end on it that looks like it should go to a harness but it is just hanging. It starts from a distribution block on the pass side firewall and ends at the drivers corner with all the wiring harnesses. I...

Re: anyone doing the Hot rod power tour? I think me, my father, and my brother will be joining on Thursday morning from Dayton and making the trip to Somerset and Bristol. Kind of hard to pass up considering I live 20min from their stop in Dayton. Hope to see some other Sy/Tys on the trip...

Re: FRUSTRATION - new injectors = no start = need help Re: FRUSTRATION - new injectors = no start = need help OK GOT IT FIXED - THANKS TO EVERYONE FOR ALL YOUR IDEAS. :tup: When I got home this evening I decided to go through all the wiring with a fine tooth comb since everyone seemed to...

Re: FRUSTRATION - new injectors = no start = need help Re: FRUSTRATION - new injectors = no start = need help As far as I know I did not disconnect the harness from the distributor. I will check this evening just to make sure I did not accidentally disconnect anything. As for the fuses - I...

Re: FRUSTRATION - new injectors = no start = need help Re: FRUSTRATION - new injectors = no start = need help No noid light. Is there a way to check without it? I guess I could rent one if not.

PROBLEM SOLVED - you guys saved me a bunch of time and effort. THANKS AGAIN! Ok guys I am in dire need of some help. Here is my problem: The truck was running lean and fouling out #1 plug - figured it was a bad injector and with 110k it was time for newer ones anyway. Bought a set of...

Re: Injectors and PCM Interested in the injectors and the dist. if you still have it. PM me. Thanks, Dustin

Re: Weird IAC problem - need some help Thanks for the replies. How would I adjust my TPS to get a higher number? I have moved it as much as I can and I can only get .45- should I enlarge the holes so I can move it further? -Dustin

Re: Weird IAC problem - need some help my TPS voltage was only .36 but I adjusted it and got up to .45 and still no change

OK here is the issue I am having and I am wondering if you guys could help me out: I was having a problem with a bad idle and an off idle stumble so I replaced the IAC and cleaned all the passages. I adjusted the idle down to where the datamaster was reading 20ish and I went through the reset...