Search results

Re: Dragstrip 1/8 video! mph?

Re: Re-clear coating stock rimsg- DIY Here is a high(er) res pic of all 4 cleared.. They came out really nice.. Can't wait to get my new tires on and get them back on the truck..

Re: Re-clear coating stock rimsg- DIY Thanks.. I finished up the other 3 yesterday. I ended up using 1 can of stripper, 2.5 cans of clear, and two 3M pads... Just one wire brush did all 4. I added more pics to the post above and will post more once I mount the tires and put the rims back on...

Re: tci trans controller I think you can tap into C11 of the DRAC and it should work...

Re: tci trans controller Just a guess but you should probably be hooking that TCI unit up to an output on the DRAC and not the sensor directly.. Or, does your 60e have a TOSS sensor you can wire to then leave the factory stuff hooked up to the transfercase sensor?

Re: Re-clear coating stock rimsg- DIY Thanks Dave! That's good info.. I briefly searched for such a product and didn't come up with much.. That's part of the reason I decided just to use an aerosol can. I knew the process I was following wasn't 100% right and figured I'd end up redoing it...

I decided to take a stab at re-clearing my stock rims and I'm quite happy with how they are turning out. I thought I'd share the process I followed in case anyone else is interested in doing it.. I started by cleaning the back side of the rims. I used wire brushes followed up with some paint...

Re: Typhoon Logo Script Here is a large jpeg file: http://mattw2.dyndns.org:81/syty/Typhoon/pictures/logos/TYPHOON_LOGO-300dpi-4x18.jpg If the printing co that you are working with is at all capable they would much prefer a vector file like a dxf. I happen to have that too...

Re: Racing at SyTys@Carlilse 2016 I'm in.. sounds like fun!

Re: CANCELLED - 2016 SyTy Nationals Exactly.. I don't think its so much a lack of interest but its more of a reflection of current priorities that most of us have at this point in our lives. For the most part we all fall in a pretty close age group. A group that is very busy with family, job...

Re: Smoke after WOT Is there smoke/air coming out when you are not covering it?

Re: burning chip help I did this MANY years ago but unfortunately I do not recall the specific details of the process.. The reason that I am posting is that I know I did 100% of it in TunerPro.. I read the BINs from my ultimate chip and then re-burned them to the chip I got from Moates to use...

Re: 4L80e output shaft Awesome info! Do you know what year 80e that shaft is for?

Re: What would be a good price to sell my typhoon quickly? Tell us where its located and post some pics..

Re: 4L80e output shaft Well that stinks! What are your plans now?

Re: Need help with numerous typhoon issues! http://www.sportmachines.net/store/engine/billet-adjustable-fuel-pressure-regulator.html

Re: Opinions on wastegate location I tapped the merge point of my manifolds and mounted mine there. That hole on the back of the PTE turbo was so much smaller than the valve on the wastegate that I just couldn't see choking it down.. I then dumped the gasses back into the downpipe as far down...

Re: Driver wheel not spinning I think just about every "AWD" car/truck/suv ever sold is 3 wheel drive from the factory...

Re: FP issues.........HELP. So it sounds like: - You have confirmed you have power going to the relay. - You have verified that the relay is energizing as you can hear it clicking - You have no power at the pump even when the relay is active.. If all of the above is true you either have a bad...

Re: FP issues.........HELP. Does the pump come on and does it build fuel pressure when you hear the relay click?