Search results

Re: Wierd Idling Issue What exactly did you do as far as checking grounds, did you look at them or use a meter to ohm them out? Also what ultimate chip do you have gauge style of radar?

Re: Wierd Idling Issue Re seat your chip on ecm, check your ground wires for ecm the one located on stud for lower intake manifold near alternator.

Re: Racetronix Hotwire Fuel Pump ? --- FPWH-010 - GMC Syclone FPWH-011 - GMC Typhoon Link: http://www.racetronix.biz/items.asp?Cc=FPWH-02&ItemMoveby=0&Nbm=BTL1-BCA&Pbm=FPWH-017&iTpStatus=0&Tp=&sTitle=&FromNav=False

Re: banging noise part 2 Any way you could video your running condition?

Re: NEW combo almost done!!! You might want to run another pcv to the intake pipe before the turbo inlet. (off the factory u pipe not shown in your pics that comes off the valve cover).

Re: Recommended boost controller I use a turbo smart e-Boost2. http://www.turbosmartonline.com/index.php?id=42

Re: knock sensor Blue wire.

Re: Dyno tuning the truck! Thought base fp is 42 on our trucks. There is a difference in dyno tuning and just paying to make pulls at least around here there is, keep AAA on speed dial for when you blow your truck up and you will be good to go. Home that is. Good luck.

Re: shift point question You can get this govenor #43G http://www.transmissioncenter.org/700r4_Parts_List.htm#Governor seems to work good if you want to shift around 5k rpm.

Re: Atr headers If you already have ATR headers you can get the crack welded.

Re: State Trooper So dressing up like a revolutionary war soldier worked and I guess the white powder wig put you over the top. Cheers Mate!!!

Re: ground issue. G108 & G109 Battery volts seem low. Going by the histogram you are running lean all over.

Re: Boost gauge??? Last time I had checked there was a boost gauge built into the factory dash, good enough for a stock truck. LoL You may want to check out this site: http://powertuneplus.com/ Good info also. Mike

Re: Question about black flap thing LOL The fire should have burned that out of there--------------------Pics? I think the black flap is a vent for the truck.

Re: Another day another problem Bike Mike?

Re: I am having 4 wheel drive trouble can any one help Does your shift indicator work? On my 97 Suburban I had a bad shift indicator and it would not go into 4 low but after i had replaced the shift indicator on the trans everything started working again.

Re: Stock cam shaft pics Show us yours first we may be able to help from your pics.

Re: WB not reading right? Too rich can produce knock too.

Re: my new motor built What is that extra plate on you rear cap, is it just a spacer or for strength? Who makes it and where did you get it? You also need to test fit your oil dip stick before you put your pan on, you may need to notch the cap or grind on the tube assembly for clearance so you...

Re: I am going to have the Syclone in the shop, need advice --- You may be able to build a nice garage withall the work your going to give to a shop, did you get a quote yet? Also rember stuff just does not bolt on sometimes it needs to be modded to fit. Where are you located again?