Search results

Re: Lotek 3 gauge pod question Unless Autometer changed there design in the last yr or so it does not attach like the lotek pod. Lotek places the gauges evenly on the pillar and uses stock mounting holes and does not reuse the factory pillar. Autometer places the gauges low to the dash and...

Re: FS: Datamaster/Laptop and gauge cluster I'm here, I don't get on the site as much as I used to. That's why I always say to email me as I can reply far quicker, I don't always receive a notification saying someone replied etc. Anyway sorry I haven't updated this as I forgot about it, sold...

Re: FS: Datamaster/Laptop and gauge cluster Ttt :d

Re: distributor install help Big stuff 3 I'm not sure how bigstuff is but I would recommend checking in the electrical forum on yellowbullet, they have a ton of people on there that know the system. I have a holley system and I know mine took quite a bit to setup, but I'm only using the...

Re: Anyone ever blow the rear driveshaft? If the u-joints are still held in place by the injected plastic, they are stock and most likely bad by now. You also so there is a powder coming out of them, sounds like there is no grease so the rollers are being ground to bits of powder. If you...

Re: Garage Sale, 4l80e controller, PLX R-500, Propshaft Loop and more I just wanted to mention you can set up the holley for a trans temp input, this way you do not need a gauge, you can also set it up to trigger an led when it gets to a set temp. Just a thought as that's what I am doing so I...

Re: Motors Out Holley EFI Coming Soon I would recommend just getting the injectors from holley, this way you do not have to worry about setting them up correctly or anything like that and they are a great part. You will be plenty fine with the 83's, I currently have 85's and am still in the...

Re: What did you do to your SyTy today? (part 2) I'm using a factory vortec dist for the cam sensor. Cheap and easy to setup :) Z Ski how is your dominator install going? I have been following your syclone build for quite a while, your doing a great job on everything and I can't wait to see...

Re: What did you do to your SyTy today? (part 2) Its amazing how much better the syclone runs when the cam sensor is not 180 off! Last time I tried starting it with the new ecm it ran but only with the cam sensor disabled and ran poorly. I finally had time to double check things and realized I...

Re: Feeling real stupid (RPM lines) It's just a guess but are you talking about the power steering cooler on the left side of the rad? From what I remember ty's had ps coolers from the factory, they were on the small side too. If you follow the 2 trans lines on the right side of the radiator...

Time to switch things up a little and get rid of the old datamaster laptop. I have no need for datamaster anymore since the stock ecm is gone. Old Dell laptop with serial port and win xp, datamaster, tunerpro rt, bunch of misc 50# and 84# bins on it and an akm cables aldl cable with keyspan...

Re: Which Data recorder and chip to get Just want to throw this out there in case you are interested, I am selling my old dell laptop with datamaster and tunerpro rt, an assortment of bins on it along with an akm cables obd1 cable with keyspan usb to serial adapter. It is basically everything...

Re: pan bolts snapped off? You could always try one of these http://www.denlorstools.com/home/dt1/smartlist_2192/rescue_bit.html Do a search on them, I believe you can buy through amazon now also. I was at sema when these came out and watched him drill through an extractor! If you use them...

Re: Backfire and a tow truck It's been a while but from what I remember, if the oil pressure sensor sees zero psi it will shut the fuel pump off. If you unplug it as I have because I don't use the stock gauge it defaults to max psi. Can't remember which wires but if you connect the 2 it won't...

Re: LED Headlight experiment Check out Jwspeaker.com, model 8900. Pretty sweet looking and they are a very good local company that make lights for all sorts of army and semi trucks. There are quite a few car builders putting these lights in builds these days. They are not cheap but you won't...

Re: I'm addicted: Sonoma gt 604 Project is looking really good so far, can't wait to see the finished product :-) For the 6.0 manifold bolts, if there is some of the bolt sticking out try to thread 2 nuts on and lock them tight together. Then turn the nut closest to the head. Even if there is...

Re: Holley HP install and tips I am only using one because I have a pte internal wg and the actuator only has one port. My holley dealer highly recommended using 2 solenoids for more stable boost control. That being said I have not finished getting my sy back together yet so I have not tested...

Re: Syclone Gut Swap Your sy is coming along nicely and your doing a great job with making it look so clean! I used the same round magnaflow muffler and it ended up being way too loud. I talked with Nolan and he said he used 2 back to back on a truck and it sounded great. I ended up getting...

Re: LS Swap Syclone Single Turbo Build Yeah the holley ecm is great and has a ton of features. I will be using it to power my weldon pump and taurus cooling fan with pwm. That way it can speed up and slow them down so it's not putting such a load on the system. If you go on yellowbullet.com...

Re: LS Swap Syclone Single Turbo Build Project looks awesome, I can't wait to see finished pics and some videos:-) I do want to let you know if you're using the dominator you can use that to run it your fuel pump with pwm, basically it will eliminate having to buy and wire it in a separate...