Search results

  1. autoaddictions

    Brodix 18* intake NEW! EFI ready!!

    Had this built for my bowtie motor using 18* 359 casting heads. I decided to angle cut the heads for better flow and as a result of that had to Build a Sheet metal intake! Work was preformed by RPM again all new parts! injectors not included!! Accufab 90mm Mustang 5.0 throttle body will bolt...
  2. autoaddictions

    2003 Evo 93k for sale

    I traded a 2003 Mitsubishi evolution with 93k on it. Very good condition keep mostly stock! it has a new clutch installed and also has 3" down pipe and exhaust. Its a very hard car to sell in NJ the insurance is ridiculous. I thought is list it here for what I traded it for if any body knows...
  3. autoaddictions

    Naste meet info for sunday!!

    Lot is cleared out ready for meet!! There is parking in the rear of smaller building next to mine for the none syty cars.. should be enough for 20x25 cars.. Front of my building will be for Syclones & Typhoons Only! Id like to keep them together for pictures. As for the food and beverages...
  4. autoaddictions

    NASTE MEET OCT 20th SAVE THE DATE

    The Date for the NASTE meet this year will be OCTOBER 20th Sunday @ Auto Addictions Inc. Rain date will be October 27th Location address; 1104 North Black Horse Pike Blackwood NJ 08012 shop # 856 374 7000 12 noon till we get board!! Last year we had to cancel for poor attendance and...
  5. autoaddictions

    New Engine for Cronic

    Opened up the doors of Auto Addictions today for Conic to Install his engine.. should be done Tomorrow
  6. autoaddictions

    RC Engineering SL4-750cc 71lbs low z injectors

    I have a set of RC Engineering 71LBS injectors i bought for a project i just finished. Turns out there at too small for what i need. I have a matched set of 8. For you LS guys they will support 800hp!! for the V6 guys 650hp. They only have a dozen DYNO pulls on them. These are Low impedance...
  7. autoaddictions

    Comment on my You tube about Typhoon

    It all ways makes me laugh how people never read the video captions! youtube.com/watch?v=Pw6YKBEBfu4 This guy had this to say. My Ty (daily driver) runs 9.9 at Bandimere. There are many many many SYTY's faster than mine. 10.2 is some what of a joke. LOL rookie.
  8. autoaddictions

    need gilbert 4l80 shaft/crossmember

    I bought my 4l80 conversion from George Blake back in 2005. I need another crossmember and front gilbert prop shaft for my Syclone. I have the billet adapter and billet input shaft for the transfer case. I just need the cables crossmember and gilbert. Any suppliers have these items ready to go...
  9. autoaddictions

    bowtie block Hard block or not?

    Im at the stage with my bowtie build where i need to decide if im going to hard block the engine. Whats your thoughts My hp goals are in the 1000 hp +. I will be street driving the truck on occasion but mostly tracked.
  10. autoaddictions

    Syclone # 972 For Sale.

    SALE PENDING SALE PENDINGI bought Syclone #972 for a LS swap but after getting it I just could not see gutting it. It was in very good shape and the engine compression is very good. I decided to sort it out and get it running properly. This is an excellent running truck that needs some minor...
  11. autoaddictions

    Naste fall meet food info

    NASTE FALL MEET OCTOBER 7 FOOD ORDER!! MENU AS FOLLOWS:: Sausage and peppers Baked Ziti Meatballs Mini torpedo rolls Assortment of Beverages Pepsi,Diet,Sprite,Bottled water ect. This is a BYOB!!!! Prices will be 10.00 per person and 5.00 for kids under 12. Bracelets will be purchased on...
  12. autoaddictions

    GN powered Sonoma.

    Found this on craigslist. firm on price i passed but it looks like its well done.. http://philadelphia.craigslist.org/cto/3101007574.html
  13. autoaddictions

    Largest bore for a vortec heads

    Anybody know how big a bore vortec heads will support. Thinking assembling a bowtie block with vortec heads. Block is at 4.040 now might have to go to 4.050 or 60.
  14. autoaddictions

    Sweet 1998 Typhoon!

    http://southbend.craigslist.org/cto/2985268618.html
  15. autoaddictions

    4 bolt main stock block

    Just seeing whats out there. Im looking for a stock block with 4 bolt main conversion. Must be no more that 20 over bore. 30 over ok if machine work fresh. I will consider short bocks as well, with nitrated cranks only.
  16. autoaddictions

    Project sounds good Syclone!!

    Well after rebuilding my Syclone for the last few years ive decided i cant take the stereo anymore. Ive been using it around the shop to make delivery's and pick up materials. Since its getting used a lot i have decide to indulge in a Auto Addictions style stereo. This will be used as my build...
  17. autoaddictions

    raw video of 10.27 pass

    I have had some request for this video with no music here you go. IQJUNyiilBw or http://youtu.be/IQJUNyiilBw
  18. autoaddictions

    Replacment dash pad

    Anybody have any luck with these. My dash on my project Sy is pretty beat up cracked and dried out. http://www.ebay.com/itm/NEW-Molded-Dash-Pad-Cover-Top-Cap-FITS-S-10-TRUCKS-SUVS-WITH-SIDE-DEFROSTER-/220922987843?pt=Motors_Car_Truck_Parts_Accessories&hash=item3370094543&vxp=mtr
  19. autoaddictions

    Buick with very nice Ls conversion.

    Posting for a friend. This was built in Auto Addictions Shop. Please spread the word...
  20. autoaddictions

    Syclone Downforce

    Shes all stock but what the hell!!! By fdeninno By fdeninno
Top