A little chip help

[derrick1972]

I wanted to see if anyone can give a me a bit of information or where to start as to where i would begin to find what kind or if this is an aftermarket chip. If haas a memory adapter if that heklps anyone along i posted some pics here any help would be appreciated.

 

[dgoodhue]

Re: A little chip help

You have a chip adapter that is piggy back to a stock Memcal. The chip with the BBZA is the stock Memcal. What is in the SST chip is unknown. It could be custom or copy of an aftermarket program.

 

[derrick1972]

Re: A little chip help

Thanks for your info is there any way to find out what the sst has on it?

 

[TYTILIDIE]

Re: A little chip help

Thanks for your info is there any way to find out what the sst has on it?

There is, you can either buy a chip burner and save the file and check it out or you can send the chip to one of us who have burners and get it done that way. Flash N Burn is $85 http://www.moates.net/product_info.php?cPath=31&products_id=197

 

[derrick1972]

Re: A little chip help

sounds good ill send it for now flash n burn over my head i assume your offering your services?

 

[TYTILIDIE]

Re: A little chip help

sounds good ill send it for now flash n burn over my head i assume your offering your services?

I dont mind doing that for you at all. I can email you the bin, you can load in to to Tuner Pro and check it out and I will also send you a brief summary on how the chip is set up. And then Ill just send you your chip back. Let me know.

 

[Chest Rockwell]

Re: A little chip help

Derrick, if this ends up waiting until I get back, I have the same stuff at home. I've got the Moates Burn1, and we could load up that chip and see what's on there, like Mike said. I'll keep watching this thread, see what you decide to do.

 

[TYTILIDIE]

Re: A little chip help

I talked to Derrick on the phone last night, nice guy. I recommended just getting all of the stuff so he has it. Hopefully he goes out and gets it all.

 

[syclone rider]

Re: A little chip help

Sorry not trying to steal your thread but could somebody pm a complete list of everything i need to burn chips and tune my truck myself.If anybody could point me in the right direction if would be greatly appreciated!

 

[derrick1972]

Re: A little chip help

i think id be better off just buying a complete 02 kit? Innovate LM2 was the one i was looking at

 

[derrick1972]

Re: A little chip help

I have parked my typhoon for the time being I did however come across some bad vacuum lines that I have changed. My ty was always idleing high of 1500 rpm when you first started it now it kicks down to just below 900 rpm. Slowly im getting things fixed I am still getting the 02 rich code on the scanner. I talked to Paul he said he would give me a hand at soem point in the future i know hes busy.

 

[derrick1972]

Re: A little chip help

I still have the vibration issue let me clarify so you understand that even in park with the truck not moving this vibration persists. Feels like between the motor and tranny or maybe a broken mount? Perhaps? Anyway enough babbling