Battery Relocate under old bat spot

[Ty 1450]

I did a search but couldnt find what i was looking for. I removed my old battery and tray and started looking for a spot to mount the new battery odyssey 680. The best spot i could see was right below the headlight, theres a little space (looks like a platform about 6 inches deep, but deep enough to hold the battery) which i think i can mount it there but cant figure out how to mount it since theres no support around that base...any ideas from those who have mounted there battery under the hood. Also i'm trying to save room over on that side to mount a trans filter. So if has some pics or any suggestions. TIA

 

[Gnocide]

only one i know of that works,just an opinion, is atrs. i have it works good with some trick mods. careful it can pull down your cladding around the fender .

 

[SY2932]

I have ATR's battery relocate kit in my syclone and I am very satisfied with it. You can buy it from here: http://www.rkkustom.com/

After relocating the battery, you will have all kinds of room... Plenty to mount a remote transmission filter: http://huryde.station180.com/gallery/view_photo.php?set_albumName=mikecampbellakaSY2932&id=abe

If you are willing to cut your transmission lines, you can make a custom air intake too: http://huryde.station180.com/gallery/view_photo.php?set_albumName=mikecampbellakaSY2932&id=acz HTH's

Mike Campbell

 

[Typhoon #1133]

hi, i have the same battery that you have. i took out the factory battery tray and made my own tray that holds the battery on a 45 deg angle. i will send you come pictures after i fix my home computer. it just died today.

 

[typhoon-crazy]

i wanted to get one of them but didnt because i thought people didnt like them...... but i guess they work 8)

 

[Loeryder]

i took out the factory battery tray and made my own tray that holds the battery on a 45 deg angle. i will send you come pictures after i fix my home computer.

I'd like to see some close ups as well.

Looking for a way to drop my battery a little without having to relocate.

 

[Ty 1450]

Well i slept on it and i think i figured a way to do it...so i'll take pics of my steps. Maybe it will turn out pretty good/work :roll:

 

[Ty 1450]

Got it in , took 3 L brackets, straps, and some bolts/nuts. Looks ok but not super great, but when i go back in there to but my new turbo on i'll rework some of it then. I took some pics but dont have a way of hosting them.

 

[Loeryder]

email them to me and I can post them up.

loeryder@swbell.net

I gotta figure something out for mine still.

 

[Ty 1450]

I sent you a email, but the one from the house is kinda jacked at the moment so if you dont get i'll send it to you from my work computer tommorow. just let me know if you do or dont get it.

 

[Loeryder]

nope nada
didnt get it.

 

[Sy769]

Glad you got it in Rudy. Better get on the schedule to get that TC installed.
I'll be gone all next week and will be off the week after. As of now I'll probably install your turbo then.

 

[Ty 1450]

for some reason i could send it to my friend, but couldnt send it to you...so i had him foward it. If you have any questions i can call you or you can call me...i suck at typing stuff out (trying to explain it).

 

[Typhoon #1133]

i just posted some pictures of my set up on my picture page. The tray i made sits on the very bottom of the wheel well. There is not way to get it any lower unless you want to cut the truck up.

http://huryde.station180.com/gallery/view_album.php?set_albumName=keith

 

[Ty 1450]

Pretty good look on yours, mine sits upright..(i dont have my tire well in at the moment hope it fits with it in

 

[Typhoon #1133]

post or send me some pictures

 

[Ty 1450]

Sent you some pics Typhoon 1133 and also sent some pics to Loeryder let me know if you get them