Full 3" exhaust pictures

[The Devils Own Chariot]

I need as many pictures of 3" downpipes as I can get that show where they go between the fender the frame. Exhaust shops are telling me they cant do it and there is no way it fits. Thats a bunch of crap and Im going to show them. Pics are much appreciated.

 

[JSM]

Re: Full 3" exhaust pictures

It can't be done....

 

[dgoodhue]

Re: Full 3" exhaust pictures

I need as many pictures of 3" downpipes as I can get that show where they go between the fender the frame. Exhaust shops are telling me they cant do it and there is no way it fits. Thats a bunch of crap and Im going to show them. Pics are much appreciated.

If you have to convince them to make it fit, your already starting off on the wrong foot. Trying ot showing them they are wrong seems like a bad idea. You have a 25G, I assume they use a stock style DP. Why don't you just buy one of Jeff Scott Downpipes?

 

[The Devils Own Chariot]

Re: Full 3" exhaust pictures

If you have to convince them to make it fit, your already starting off on the wrong foot. Trying ot showing them they are wrong seems like a bad idea. You have a 25G, I assume they use a stock style DP. Why don't you just buy one of Jeff Scott Downpipes?

I would but the 25g does not sit exatcly in the same location the 17c does. The exhaust housing sits different.

 

[JSM]

Re: Full 3" exhaust pictures

Got a picture of the exhaust housing?

 

[The Devils Own Chariot]

Re: Full 3" exhaust pictures

 

[JSM]

Re: Full 3" exhaust pictures

Have to look later, cant see photobucket here at work.

 

[Loeryder]

Re: Full 3" exhaust pictures

'ere

 

[Foot Performance]

Re: Full 3" exhaust pictures

That is stock only I dont think Jeffs down pipe will fit on that at all since that turbo is external WG only

If you look at these pics that is what the JS flange covers extra on the stock turbo
http://www.syty.net/forums/showthread.php?t=68986

 

[Loeryder]

Re: Full 3" exhaust pictures

Correct.
Jeff's flange for stock / mitsu turbos will not work on this housing.
You could hack the flange off your stock DP then have them weld from there down.

 

[The Devils Own Chariot]

Re: Full 3" exhaust pictures

Thats what I wanted them to do.

 

[Loeryder]

Re: Full 3" exhaust pictures

Find a fabricator and not an "exhaust only shop" and they should be able to handle it.

 

[Foot Performance]

Re: Full 3" exhaust pictures

Find a fabricator and not an "exhaust only shop" and they should be able to handle it.

That is what I would do. Find a good shop. Muffler shop are usually just that:tup:

For one you would have to chop it back about 4 inches to get past the cut out for the WG puck

And the JS pipes are usually hard to get since he makes them here and there

 

[JSM]

Re: Full 3" exhaust pictures

got a shop on your way to nats that will, had a mandrel bender on location just leave 5-6 hrs early.

my dp won't work with that flange.

 

[Aeroking]

Re: Full 3" exhaust pictures

my homemade 3" stainless

after the downpipe, i just run straight 3" to the muffler (next to the gas tank), and a turndown out the muffler.

 

[The Devils Own Chariot]

Re: Full 3" exhaust pictures

Yes! thank you!

 

[Syclone#892]

Re: Full 3" exhaust pictures

Sorry no pics of mine setup but you can defiantly fit a 3" with room to spare. I have a 3.5 and I think robert (mrsyclone) has a 3.5 or 4" with a/c on one of his trucks.

Good luck finding a fab shop to help ya out