Oddfire compatibility? EFI connection

SYCLONE#1531

SYCLONE#1531

'MOFOFAST
Im now starting the process of figuring out what ecm set up to use for my build and how to make it run the easiest for me! Any recomendations on a ecm? Fast , biggstuff, dominaor etc? I have talked to efi connection about this set up that has both a cam and crank sensor 58x but not sure this would work with my application. Its for a 4.3 v6. I also have a oddfire msd distributor for the worst case senario. I would love to run this set up with coil packs! Any direction appreciated!
https://www.eficonnection.com/home/...ion-kit-w-1x-cmp-in-timing-cover-w-cam-button
 
Last edited:
Aeroking

Aeroking

e.i.
Re: Oddfire compatibility? EFI connection

I have EFI connection stuff on my truck with the Haltech Elite. I use 6 LS3 coil packs, it works fine. And for oddfire, you can just identify which cylinders are 120, and which are 90, you dont need a oddfire distributor.

I have the billet front cover with Crank sensor, and the drop-in cam sync "distributor". I figured the cam sensor in the front cover would hit the water pump, but i never actually tried it.

IMG_20161123_102619039_zpspcvf06xw.jpg


IMG_20161123_104536195_zpspzacavfx.jpg
 
Last edited:
fivetodrive

fivetodrive

CRISPY
Re: Oddfire compatibility? EFI connection

The motec works as well. The m48 has the oddfire option.

Which haltech are you using?
 
Last edited:
You must log in or register to reply here.
Top