93 TY 2185
Donating Member
Anyone make a stock turbo replacement cartridge? I did quite a lot of searching but came up empty.
No upgrade advice please I'm sticking to the rules.
I need to be more competitive with Jeremy next time we meet.:tup:
Stock Turbo
Any Tire Allowed
Stock type leaf rear suspension,traction bars Ok. Fiberglass springs,lowering blocks permitted.
Any trans
Front suspension-any
Stall converter is permissable.
AWD
Headers Ok, must keep stock turbo location
Stock TD06-17 turbo with stock 8cm exhaust housing
Stock unported heads must be used. If L35s are on the truck, they must be unported, and the owner must
provide documentation from GM that this truck was delivered with L35 heads.
SyTy Intake manifold
Engine internals, cam, etc, must all be stock. Production block with wet sump oiling.
Stock upper intercooler, no restriction on rest of system
Alcohol/water injection as anti-detonant permitted.
No NOS
Stock ECM (injector driver mods ok)
Any chip
Truck must weigh at least 3500# with driver, Ty must weigh 3800# with driver
Ty gets .4 head start
No upgrade advice please I'm sticking to the rules.
Stock Turbo
Any Tire Allowed
Stock type leaf rear suspension,traction bars Ok. Fiberglass springs,lowering blocks permitted.
Any trans
Front suspension-any
Stall converter is permissable.
AWD
Headers Ok, must keep stock turbo location
Stock TD06-17 turbo with stock 8cm exhaust housing
Stock unported heads must be used. If L35s are on the truck, they must be unported, and the owner must
provide documentation from GM that this truck was delivered with L35 heads.
SyTy Intake manifold
Engine internals, cam, etc, must all be stock. Production block with wet sump oiling.
Stock upper intercooler, no restriction on rest of system
Alcohol/water injection as anti-detonant permitted.
No NOS
Stock ECM (injector driver mods ok)
Any chip
Truck must weigh at least 3500# with driver, Ty must weigh 3800# with driver
Ty gets .4 head start