Recent content by turbotater

Re: Motor mounts???? there is another choice . drill a hole thru the stock rubber mount and use a bolt and nylock jamb nut no vibe - no breakage mike

Re: choice between 2 turbos gt4088 or 67 p trim http://www.limitengineering.com/gt-40-full.jpg I finally got off my butt and made an excel sheet for looking at compressor maps and the 58mm i put on when my other turbo died looks better than i thought . I never bothered to go past 15 lbs but...

Re: choice between 2 turbos gt4088 or 67 p trim 64.5 mm inlet on the compressor wheel I'll find the link

Re: choice between 2 turbos gt4088 or 67 p trim neither are the ball bearing versions looking at compressor the compressor map i think the 4088 may be a little better in the midrange bit I wonder if it is enough turbo to get to the low 11 high tens mike

I am finally working on my truck again my 70mm turbo broke and i found out it was a mismatched piece junk that was assembled with parts not meant for each other any way I can buy a new gt4088 for $719 or a new 67 p trim garrett for $849 combo is ported l35's , .510 210@.050 cam , torque...

Re: Question to the guys making there own headers i used 1 5/8 primary and a 2 1/4 crossover i have a few pics here http://s3.photobucket.com/albums/y97/turbotater/?start=20

I was wonderring if you or robert ever participated in this event in your area ??? the stockholm open ... http://video.google.com/videoplay?docid=6895921194822250807&q=speedlife mike

Re: my evening of racing at the nats friday night i was looking at my time slips and although the truck did not perform i was "lucky" on my reaction times . .059 green .000 green .159 a little late .060 red and then a couple of trying higher boost launches and just sat there till i was...

Re: my evening of racing at the nats friday night friday ended up being my " good " day i finally got the intecooler pipe to stay on but my laptop was dead so no info or chipping ability intercooler pump had no power the truck needed alot more timing but i didn't break it so it is just a...

Re: Big thanks to Dennis for the ride home just making sure who is who . Dennis is the one with the typhoon with the vented hood and pace car graphics ??????/ if it is he should have won most helpful /best attitude person at the nats . he came over and offered parts off of his truck just so i...

first pass :i get ready to race and my wide band stops working then there was some "confusion" from track officials sbout letting laptops in the truck during runs . i was told no laptop . frustrated that i am surronded by people that can help and no way to log wideband or datamaster i pull...

i will be arriving about 12:00-1:00 and looking to meet up with people before i go to the dyno . my # 417-861-8683 mike

Re: Dyno on Friday(updated please look if you are interested in running your truck) i will be there dynoing . although i will probably have the lowest hp to mod ratio . mike

Re: Dyno on Friday Re: Dyno on Friday is there going to be any tuning time allowed ? will there be people that are experienced tuners hanging around to help novices ? what time on friday ? i will participate do i need to send a deposit? mike

Re: made a pass finally i tried to a higher boost pass @22 psi and the motor felt like i put a small n2o kit on it but it detonated some so i had to lift . next time i go i will put some good gas in it and try the higher boost again .