Recent content by Wes

Re: What's a reasonable price for this Sy? What would you do with a running truck though ;)

Re: New A2A installed and working great...A/C also ! ! ! Looks good. Will the line clear the top port on the wastegate? If you get an aftermarket line they have a bend in it that will help it clear.

Re: Arizona syty status Bill's truck runs great sometimes, and sometimes it just dies while driving. He bought a Porsche Cayenne turbo for something more reliable. It's not as fast but is very luxurious.

Re: Remove checkball and retainer or just checkball? Brian Hartman told me if your converter is stock or so-so then just take out the ball, but if you have a good quality converter you can take them both out. I took both out when I built my friend's tranny (with a billet converter) and it's...

Re: Going to Speedworld Well it's my friend Bill's truck, I can ask him but he's not really that much into racing - just likes to take it to the track to see what it will do.

Re: 11 second runs from last night You're hearing the lockup. It automatically locks up at about 70mph (which is a little bit after it shifts into 3rd). It goes down to about 3500rpm and there's a ton of torque at that rpm.

Re: Another stock block Ty in the 11s It still did it some at 15psi. I set the plugs at .030 so they're pretty tight. I did get a new cheapy coil from Autozone (because the terminal on the original one was pretty corroded), but it never had any problem before this - but yeah I was thinking...

Re: Wastegate Solenoid HELP Please It doesn't connect to anything.

Re: 11 second runs from last night Mods are here http://www.syty.net/forums/showthread.php?t=25815 Launched at about 2-3psi, track was pretty slippery and definitely a handful on the launch.

Re: Another stock block Ty in the 11s

Re: Going to Speedworld OK we'll give 25 :p Videos are up http://www.syty.net/forums/showthread.php?t=25835

Re: Another stock block Ty in the 11s Here's the videos http://www.syty.net/forums/showthread.php?p=222254#post222254 Mod list 100% Factory stock bottom end Blitz Dual SBC spec R boost controller TiAL 38mm wastegate TE60 turbo ATR headers, downpipe, and 3 inch exhaust ATR cold air intake...

www.fivaxis.com/1181.wmv www.fivaxis.com/1177.wmv :)

Re: Another stock block Ty in the 11s Thanks guys. Well if it didn't have that problem, who knows :evil: I know we're already pushing it with the stock bottom end, but I tell you it felt really smooth and knock was like 1.5 so I think it could have gone 11.5, but I really don't want to have...

11.77 @ 118 Just made this pass tonight, it's an awesome feeling driving something that fast! We should have videos in a day or two. Started on 91 octane at 15 psi, and my friend was driving (it's his truck). First pass was a 13.0 Second was a 12.5 at 108, much better. Then we put 107 octane...