Search results

Hey guys, I sold my truck to a very nice guy and his wife. They flew in from Florida to pick it up and drive it back. I recently installed a new Walbro Fuel Pump & AFPR. The truck runs and ran great. When they arrived, I picked them up at the airport, in the truck, and then took them for a...

Well it was one kill, and one very surprised Cobra Owner. I raced a built Z-28, (He is my boss), and I destroyed him from the line, and when I let out, at about 60mph, I was still pulling. Second, was from a role, with the 2004+ cobra behind me out of a slight turn. I hit it, he hit it, and...

Ok, when I was a 2bar, and stock MEMCAL, my stock boost guage would pegg up at the top, and do it rather quickly. Now, with the 3bar and ultimate, it only goes up half way, while the boost guage goes to 16psi, however, it just seems like it is taking longer for the boost to build up than it...

My last post in the forum about asking for help was this. "The ECM can handle boost levels over 14.7, up to 17.5. That is why the 10n1 was created. For tight wads. What the ECM will not do is adjust fuel or timing after 14.7. After 17.5, as Todd explained it, the ECM then goes a little wacky...

My computer crashed, and I had website that I frequented because the exceptional list of vendors. The home page was a Green on Silver Typhoon with an explanation of the Typhoon's performance. It has a tip and tricks page, similar to that of Sportsmachines, but anyhow. Anyone know?

Ok the seller says I have to use a 3 bar, but 10n1's do use 3 bars.....RIght??? Ok secondly it has the Radar box, and the cable is hard wired to it, with the older style key, but the box toggles through more than 17.5 psi. Matter of fact it has the three T1-T3 timing curves, but the boost...

I bought the 10n1 from someone here. The truck starts up and idles smoother than without it. The Security feature works as advertised. I can toggle through all of the settings with no problem. However, it feels like it is stuck in Valey mode. The boost comes up slow and the motor dies at...

I just installed it, and the truck idles, drives, cruises perfect. But when I get on it, it acts like it is in vallet mode or something, because it dies at around 3,500rpm registered yet I have it set on T1-16. Can someone please help me. Did I install it right? What is going on? I know I...

Ok Gents, my worst fears may have come to pass. It appears that the Grand Cherokee SRT is the new king of the hill, and with it running mid 13's or better STOCK, just think what anS/C would do for it??? Keep in mind it to is AWD! Plus they look awesome! :rant:

Hey, where are you guys installing these, and what about the factory regulator. Does it get taken out, and if so, where in the George Hall is it!? Install help needed. :roll:

Ok, here are the options that I think exist. Sizes are, 8.5 and 9.5 9.5 and 9.5 9.5 and 11 Then there is color Polished, Silver, Gunmetal, Chrome, and Black Ok, I'm thinking the that the 8.5 and 9.5 would look the best in Gunmetal, but I'm hoping that some of you guys have pics with sizes...

Hey guys, I searched dag nabbit. Which offset should I be looing to buy for the rear corvette 11in. rims? The 56mm, 50mm, or 36.5mm offset? Further, will I need a spacer, and if so, which one? Will the front 9.5in. rims bolt right up with no spacing issues with the 56mm offset for the front?

Would someone please help me get in contact with whomever it is that I need to talk to get a Gilbert Propshaft. I've emailed them with no results. I need one asap. PLease help. Are there other options that anyone would recomend as just as good?

http://cgi.ebay.com/ebaymotors/WELD-STYLE-15-Wheels-aluminum-Ford-Dodge-Chevy_W0QQitemZ8073704535QQihZ019QQcategoryZ43955QQrdZ1QQcmdZViewItem Please check out this link to ebay, and let me know if these rims are worth my time. I'm wanting 8" fronts, and 10" backs. Would I just increase the...

Will the brakes clear the Weld Racing Drag Lites which are 15" rims? Further, which rims should I get? Meaning, which size/backspacing exc..... Thanks.

Hey, what benefits, or lack thereof, or whatever, would there be in putting the water injection nozzle before the IC? I've got mine just after the turbo. Was wondering if it matter so much. I'm figuring that the air coming out of the turbo is hot, and the water injected right there would cool...

Hey guys with the 10n1, what fuel press. should I be running, using the walbro 255? Thanks

Hey guys, so here is what is on its way to me right now. 1. 10n1 chip 2. Walbro 255 3. FPR 4. 2 pillar 2n5/8 guage pod 5. boost and fp guages in silver(my TY is silver) 6. zq8 steering box 7. Next will be gilbert propshaft 8. Current mods are relocated battery to back & filter relocated to...

Hey guys, thank you so much for your info on helping me decide on the gilbert propshaft. Ok, question. Can I pull my stock propshaft off, and run the truck without it, until I get the gilbert, so to prevent any possiblity of the stock breaking? Further, will I be able to still flog my truck...

Hey, has anyone heard of a stock propshaft giving way on applications with stock turbo, and boost under 18psi? J/C. I'm looking at buyinga stock shaft, in lieu of a Gilbert due to cost, and want some input on what you guys think? I figure I'll never get in to the 12's, and if I do, it will...